Question Questions Before I start my Wii Portable

Dango

.
.
Joined
Oct 27, 2019
Messages
32
Likes
43
Hi guys, I'm planning on making a Wii portable (most likely a g-wii rev 2)


Before I start working on the Wii I have a few questions
  1. What kind of Audio amp supports speakers and a headphone jack?
  2. I have a kingston microSD reader, what kind of Samsung Evo should I get, the Select or the Plus?
  3. What kind of SD card can I use when installing PortablizeMii? Would a 8gb sandisk work?
  4. Did I buy the right kind of wires? (34 AWG magnet wire, 22 AWG stranded wire, 24 AWG stranded wire)
I have a 4 and 6 layer Wi, i'm planning on practicing on the 6 layer until i'm ready to work on the 4 layer one, I'm in the early stages right now and I don't want to buy more materials until I know that PortablizeMii works and I can start the relocations

Also i'm making a BOM just to keep track of what i'm going to buy and what I've already bought

Thank you to everyone on BitBuilt, everyones really helpful!
 

xsping

.
Joined
Dec 9, 2018
Messages
124
Likes
43
you can directly go to 4-layer wii, it is a more developed trim,6-layor is not easier except a little easy to solder.
 

Dango

.
.
Joined
Oct 27, 2019
Messages
32
Likes
43
you can directly go to 4-layer wii, it is a more developed trim,6-layor is not easier except a little easy to solder.
Yeah I'm going to use the 4 layer, the 6 layers just going to be there for me to practice difficult relocations
 
Top