Solved Bluetooth modul dan chip mx not work

[wonk]

Hi all.
i need help, i have relocated the mx chip and bluetooth module, but both are not working,
relocation based on wii definitive trim instructions,,
4 layer rvl60 board
I have checked the cables several times, everything seems to be correct, there are no shorts or wrong paths...

wii runs normally using rvloader,
can play gamecube and wii games, the problem is bluetooth and mx chip are not detected,

 

[CrazyGadget]

Can you post pictures of your wiring? It's impossible to tell what's wrong without them.

 

[wonk]

 

[wonk]

 

[wonk]

that's how I connect the cables

 

[Stitches]

Have you ensured that 3.3v is being supplied to all 4 marked legs on the MX chip? I've had occasions where one leg wasn't internally connected to the other 3 due to trimming too close

 

[wonk]

Have you ensured that 3.3v is being supplied to all 4 marked legs on the MX chip? I've had occasions where one leg wasn't internally connected to the other 3 due to trimming too close

oh my gosh, you are absolutely right... I only connected 3.3v to three legs not four, I missed one...
thanks I will try again