Solved Av multi out

Discussion in 'Other' started by Den Den, Jun 15, 2016.

  1. Den Den .

    Joined:
    May 26, 2016
    Messages:
    32
    Likes Received:
    3
    If I want to put the av multi out port in my PSone portable how would I do that? Is it as simple as soldering a couple wires to the port and on to the holes where the port originally was? I noticed some people included them in their portables whereas a lot of people don't...is that because it is difficult or is it simply not viewed as worth it since one of the purposes of a portable is so you can play anywhere without a tv?
     
  2. bentomo sands mobos in a single swipe . .

    Joined:
    Jan 28, 2016
    Messages:
    91
    Likes Received:
    48
    That's prety much how simple it is. A lot of people don't include it because the ports are big and they usually have a home version anyway.
     
  3. Den Den .

    Joined:
    May 26, 2016
    Messages:
    32
    Likes Received:
    3
    ok thanks...u wouldn't need a switch for it would you?
     
  4. Luke .

    Joined:
    May 23, 2016
    Messages:
    197
    Likes Received:
    200
    Location:
    Texas
    Portables:
    2
    Usually what people do is instead of having a switch on av, they just have a power switch for the internal screen. This also helps save power, since you wouldn't need the internal screen on while you're hooked up to a tv (obviously) :P

    You CAN get away without a switch of any kind, but you'd be splitting the signal in half which results in a slightly degraded picture.
     

Share This Page

Loading...