I trimmed my wii and sanded the hell out of it but it still has shorts I had tape over everthing while trimming. Im reading these ressitances:
1v to Ground: 0.7Ohm
1.15 to Ground: 75.8Ohm
1.8 to Ground: 37.1Ohm
3.3 to Ground: 1.5Ohm
There are no visible shorts between the layers and I sanded up to a 2000 Grit
1v to Ground: 0.7Ohm
1.15 to Ground: 75.8Ohm
1.8 to Ground: 37.1Ohm
3.3 to Ground: 1.5Ohm
There are no visible shorts between the layers and I sanded up to a 2000 Grit
Last edited: