Question Maybe Ashida bricked wii

[Stitches]

So I should shortcircuit r, l and z independently, put a switch/button in the middle of data line and continuing pressing it while trying to boot the console?
If I understood it right I will try, but first, I forgot to include something. When you guys told me to open priiloader and selecting install file on autoboot I got the dacotaco screen where I had to press a or something like that. No sign of the controller working, but again in priiloader it was working, so I resoldered a gc port and tried with a real gc controller and I was able to finish the installer. I don't remember if it worked on rvloader too, but I wasn't happy about it because obviously it has to work with the gc+ 2.0. But now i'm thinking could that help with the safe mode? I will try... after going into safe mode what should I do to repair rvloader and make it recognize the gc+2.0?

No I meant the controller data line that goes between the GC+ and the Wii's player 1 via.

If you have an available controller port to use, then I would try using the controller port again to get RVLoader into safe mode and re-run the installer. If the problem is what I think it is, the GC+ should work properly again after a reinstall

 

[Portable_Noob]

No I meant the controller data line that goes between the GC+ and the Wii's player 1 via.

If you have an available controller port to use, then I would try using the controller port again to get RVLoader into safe mode and re-run the installer. If the problem is what I think it is, the GC+ should work properly again after a reinstall

I went on priiloader with the reset button, pressed on load/install file or something like that, loaded "rvloader", and the installer started, had to change gc via, don't know why, I put it in the second one from the bottom, reinstalled everything and now it's working.
Thank you so much.
I soldered the gc port with a controller and don't know if that helped but now it works.

 

[Stitches]

I went on priiloader with the reset button, pressed on load/install file or something like that, loaded "rvloader", and the installer started, had to change gc via, don't know why, I put it in the second one from the bottom, reinstalled everything and now it's working.
Thank you so much.
I soldered the gc port with a controller and don't know if that helped but now it works.

This has been a weird troubleshoot, but success is success! Well done

 

[Portable_Noob]

This has been a weird troubleshoot, but success is success! Well done

XD You're right, thank you and the others for the help, I have other minor issues regarding audio but i'm gonna try to see if I can repair it myself, other than that I wanted to do a mod to wire another vga line to go out with a type c connector, I made a type c cable male to vga and 1 component so that I can get out video. But I needed to repair everything first xD. Maybe I'll post something if I can get it done