Question concerning fujiflex

[Sdouyoulink]

Why is my screen red, I checked the connection of the path, does anyone know the solution to this problem

 

[WolfSquatch]

I had this problem while wiring VGA, it is probably one of your R G or B wires, I had to rewire them several times to get it to work. Another thing that I feel like it may have been for me was reseating the LCD ribbon cable. Just something to try

 

[Sdouyoulink]

I had this problem while wiring VGA, it is probably one of your R G or B wires, I had to rewire them several times to get it to work. Another thing that I feel like it may have been for me was reseating the LCD ribbon cable. Just something to try

I'm connected to HDMI, not vga

 

[supertazon]

The issue might come from the fact that you are using a solid pcb and not a flex pcb? Otherwise I would reflow the pins of the Spartan FPGA chip

 

[Sdouyoulink]

The issue might come from the fact that you are using a solid pcb and not a flex pcb? Otherwise I would reflow the pins of the Spartan FPGA chip

It doesn't matter what kind of PCB it is

 

[vladimir_pootis]

it could be that the green and blue wires arent making good contact