RVLoader v2.1

Feedback_Loop said:
I did a stupid move, I selected vga and instead of forcing video output to check that it worked, I took apart the wii and trimmed the board. Is it likely that it was installed correctly and I dont need to worry about it? or should plan on getting a new wii? I followed all the steps, the only thing I didnt do was double check it was installed
Click to expand...
Should be fine. If somehow the VGA installation failed, you can use composite video to re-run the installer on the trimmed Wii.
 
Thank you for this! This is basically perfect for my soft-modded Wii. I don't know much about any of this, and I know you don't plan to support usb controllers. Does Fakemote change that? I haven't yet tried installing RVLoader and Fakemote on the same system, and they're probably incompatible with eachother, but having them together would be *chef's kiss*! The only thing I'm missing is a high quality Wii video output solution which hopefully the Direct Drive will be able to fix (sidenote, a version of the Direct Drive with HDMI out that could be installed in stock systems would be beautiful to see from 4Layer).
 
hey everyone this is kinda random but would a 5 inch raspberry pi screen be good for a g wii portable??

PS im sorta a noob
 
sry another question, im building a gwii but need the usb c to regular usb for data transportation/power but i cant seem to find one:\ any info/help would be awesome.
 
dababy said:
sry another question, im building a gwii but need the usb c to regular usb for data transportation/power but i cant seem to find one:\ any info/help would be awesome.
Click to expand...
Search for "USB-A to USB-C cable". The big rectangle USB ports are designated USB-A, so sometimes when you just search for "USB-C cable" it just shows you cables with USB-C plugs on both ends.
 
leos0426 said:
Thank you for this! This is basically perfect for my soft-modded Wii. I don't know much about any of this, and I know you don't plan to support usb controllers. Does Fakemote change that? I haven't yet tried installing RVLoader and Fakemote on the same system, and they're probably incompatible with eachother, but having them together would be *chef's kiss*! The only thing I'm missing is a high quality Wii video output solution which hopefully the Direct Drive will be able to fix (sidenote, a version of the Direct Drive with HDMI out that could be installed in stock systems would be beautiful to see from 4Layer).
Click to expand...
Fakemote is not compatible with RVLoader as of now. This might change in the future, we'll see
 
sry i wrote the message wrong im looking for the usb-c pcb, not cable (my bad) do i just need a breakout board?
 
In case someone of you needs to bring the Wii back to normal use (RESTORING DVD DRIVE FUNCTIONALITY AND WIFI/BT MODULE) just follow these steps:

google for these 3 files:
  • IOS36-64-v3608.wad
  • IOS58-64-v6176.wad
  • IOS80-64-v6944.wad
copy these 3 files in your sd card and put it into the Wii.
open Wad Manager.
uninstall each one of these three Wads and re-install them.
HARD RESTART YOUR WII!
now your DVD Drive and Wi-Fi/BT are working again.
 
Giorgio_270 said:
In case someone of you needs to bring the Wii back to normal use (RESTORING DVD DRIVE FUNCTIONALITY AND WIFI/BT MODULE) just follow these steps:

google for these 3 files:
  • IOS36-64-v3608.wad
  • IOS58-64-v6176.wad
  • IOS80-64-v6944.wad
copy these 3 files in your sd card and put it into the Wii.
open Wad Manager.
uninstall each one of these three Wads and re-install them.
HARD RESTART YOUR WII!
now your DVD Drive and Wi-Fi/BT are working again.
Click to expand...
You what? You only have to re-run the installer in safe mode to enable wifi (if you patched it out) and then set priiloader to boot to sysmenu. The DVD drive and BT module aren't disabled, there's no need to fuck around with wads
 
Stitches said:
Composite will work if using standard issue AV cables and the mode pin is not shorted to 3.3v. Component (YPbPr) is the one that will not work if the VGA patch is enabled, due to the YPbPr lines also being used for VGA RGB output.
Click to expand...
How can I reverse it? I accidentally enabled the VGA
 
GbasBoi said:
How can I reverse it? I accidentally enabled the VGA
Click to expand...
Hold L+R+Z on your GC controller while booting the Wii to enter safe mode. From there you can run the installer again and choose different options
 
GbasBoi said:
I WANNA KISS YOUR BEAUTIFUL FACE MUA
Click to expand...
this one blush.png
 
>"Added option to enable cheat codes in gamecube titles"

I haven't found how to use the cheats. Is there something like a secret menu? :)
 
You must log in or register to reply here.

Similar threads

Aurelio
  • Locked
  • Sticky
Guide RVLoader F.A.Q.
Replies
0
Views
45K
Aurelio
Aurelio
WuaZ
Question RVLoader installer and custom IOS
Replies
8
Views
5K
SimplyStevii
SimplyStevii
smennega
Question No video output after rvloader install.
Replies
3
Views
4K
bossatornio
bossatornio
Gibby0611
Question How to install RvLoader 2.0 Virtual Console game covers
Replies
1
Views
3K
Darkside19
Darkside19
SARankDirector
Rvloader manual install?
Replies
0
Views
3K
SARankDirector
SARankDirector
Back
Top