Solved Resistors?

[Kameron]

I've reviewed over and over again the section on custom regs, but still can't find or understand if the 2 (3.3v) , 1.15v, and 1v use the same resistors or different ones? My initial understanding on how to achieve the required "step down" was that 4 resistors (one on each regulator )were to achieve the different voltages. I checked on ebay for example the 1v 87.2 ohm but couldn't find anything. Am I missing something.

 

[Kameron]

Correction, a little more digging and I found this : https://bitbuilt.net/forums/index.php?threads/resistors-for-custom-regulators.1078/