Solved NO SIGNALE.. mon premier gboy

[groseil]

Hi, i'm building a gboy, i just finished the wiring to test it.
the problem... I have no signal. Not even a black screen.

specification:

I'm using composite for now.

I use composite from the front of the console

I haven't connected u10 from pms yet. I'm using the original Wii U10 chip.

VGA is enabled but 3.3V mode is not connected.

When i measure the battery i get 3.8v

This is my first time using the PMS Lite and it's my first Gboy, so if there are any errors in my wiring please let me know. THANK YOU!

 

[Jonny]

Pictures would be helpful. Have you checked for shorts? Or rather gone through a full resistance table? That would be a good place to start.

 

[groseil]

Hi, i have been working on this in the meantime. I simply decided to desolder and resolder my wires and the console. It worked miraculously. !!! Maybe I forgot a wire during the first assembly? or maybe it was magic!
Thank you anyway for your response.


Google translate