Worklog my working ps2 in wiiu pad

[ohkin86]

Well, guys, I use the case bought from Alibaba to make my PS2 portable. I use 90006 motherboards and 6.5 inch LCD. Use 2 section 18650 Panasonic 3.7V battery. It takes about 1.5 hours. This is the first time I do the handover, and its the AV output used. Next time I'm ready to use HDMI.

 

[Koksi_90]

Sorry, but why a PS2 90006?
There is no Softmod for this Board?
A PS2 79001 can be trimmed to nearly the same size (look to the Guide section)

Best Regards

 

[Nold]

Sorry, but why a PS2 90006?
There is no Softmod for this Board?
A PS2 79001 can be trimmed to nearly the same size (look to the Guide section)

AFAIK that's not correct. early 9000x models (date code before "8C") still have a v220 bios, supporting FMCB.
Also i find it quite hard to get my hands on a 7900x board

 

[MRKane]

Now where did you get those sexy Playstation buttons that fit the Wii U!? I'd love some of those!

 

[Koksi_90]

O

AFAIK that's not correct. early 9000x models (date code before "8C") still have a v220 bios, supporting FMCB.
Also i find it quite hard to get my hands on a 7900x board

Okay, i didn't know that.
That Project looks pretty good.
Nice to see it finished

Yeah, i know that, i only found 2 79004 boards

 

[MasterNate]

I am very interested in those breakout boards for the wii u controls. Where did you get them?

 

[Stitches]

I am very interested in those breakout boards for the wii u controls. Where did you get them?

Probably ebay or aliexpress, they're cheap if you get them unpopulated. https://www.ebay.com/itm/10-Pin-FPC...Board-0-5mm-1mm-Pitch-Pack-of-3-/301724393511

The U looks like it uses 0.5mm pitch, so you could get some cheap FFC connectors and solder them to the boards.

 

[ohkin86]

Sorry, but why a PS2 90006?
There is no Softmod for this Board?
A PS2 79001 can be trimmed to nearly the same size (look to the Guide section)

Best Regards

Because I don't have 7900x， ps2 90006 using MARS816HD chips can wark softmod，is same。
My second PS2 portable , expected to use 79002，thanks

Now where did you get those sexy Playstation buttons that fit the Wii U!? I'd love some of those!

You know, you can cut off the wiiu buttons and the PS2 buttons，And then paste them again，
Wiiu pad hole, can be expanded using a bit。Doing this makes it look more like a real PS2。

I am very interested in those breakout boards for the wii u controls. Where did you get them?

You know I am in china,we have alibaba,`(*∩_∩*)′
I get a wiiu case，ps2，It's very cheap.
thanks

 

[Stitches]

Because I don't have 7900x， ps2 90006 using MARS816HD chips can wark softmod，is same。
My second PS2 portable , expected to use 79002，thanks


You know, you can cut off the wiiu buttons and the PS2 buttons，And then paste them again，
Wiiu pad hole, can be expanded using a bit。Doing this makes it look more like a real PS2。


You know I am in china,we have alibaba,`(*∩_∩*)′
I get a wiiu case，ps2，It's very cheap.
thanks

Please don't post so many times in a row like that. We have an edit button, and you can reply to more than one post at a time in a single message.

Case looks good btw.

 

[xck]

快完成了吗 加油 期待成品。