Question GC+ 3DS Joystick issue on Wii

[Crazzyleprechaun]

I had this working but whenever I moved the joystick in the Y direction the screen flashed and switched through channels and wii games etc.. but the x and diagonal directions would work so I tried to change some GC+ settings and adjust the range and now it just goes so far off the screen the console freezes Is there anyway to reset this?

 

[Aurelio]

Hold down X+Y+A and then turn on your Wii, this will reset the ranges and the dead zone settings

 

[Crazzyleprechaun]

Okay thank you I will try that

 

[Crazzyleprechaun]

Sadly that didn't fix it the bottom right of portablizemii has a spinning ornament and it says please wait and it's only when the joystick is connected

 

[Aurelio]

Sadly that didn't fix it the bottom right of portablizemii has a spinning ornament and it says please wait and it's only when the joystick is connected

That looks to be a problem related to the C-Stick. Try running the GC Controller Test homebrew and tell me what you get on the C stick signals

 

[Crazzyleprechaun]

Should I use the gc+ to run it because when it's connected I can't select anything on the screen

 

[Aurelio]

Should I use the gc to run it because when it's connected I can't move anything on the screen

Do you actually have a C-Stick wired up to GC+? Because I remember @Gman had a similar problem and it turn out that he had a broken 3DS slider and he had to replace it

 

[Crazzyleprechaun]

That might be my issue when I run the test it says the regular stick is stuck in the down left position and there's not even a stick connected to the gc+

 

[Aurelio]

That might be my issue when I run the test it says the regular stick is stuck in the down left position and there's not even a stick connected to the gc+

That is the problem! You need to have both sticks/sliders connected to the GC+, otherwise it's going to read noise and give random values

 

[Crazzyleprechaun]

Oh man that's embarrasing I'm sorry I didn't even know that

 

[Aurelio]

Oh man that's embarrasing I'm sorry I didn't even know that

It's alright. Let me know if it works

 

[Fiskers1208]

It's alright. Let me know if it works

Can you please provide a link for the 3ds sliders

 

[cheese]

Can you please provide a link for the 3ds sliders

Ought to look for things yourself first, it took all of 5 seconds to search on ebay for "3ds joystick"

 

[Fiskers1208]

Ought to look for things yourself first, it took all of 5 seconds to search on ebay for "3ds joystick"

can you provide a link to an image of a pinout for the 3ds sliders.

 

[cheese]

can you provide a link to an image of a pinout for the 3ds sliders.

http://lmgtfy.com/?q=3ds+slider+pinout

 

[Matthew]

@cheese, that's by far my favorite meme