Guid
.
- Joined
- Oct 20, 2023
- Messages
- 7
- Likes
- 1
I realize people don’t usually make GameCube portables anymore but I have an extra board laying around that came from a lot of stuff I bought from eBay from a modder that gave up from what I can see.
I would build the GameCube into a console but the ports were cut off with a dremel. I took the time to desolder all the left over cut off pins from the connectors and decided I’d like to build this into a portable. The lot also came with a trimmed Wii mobo which I’ll build into something else in the future.
my question is there anything readily available online as far as power management goes or would I have to use custom regulators for every voltage line I need for the board? I’m good with an iron and can use kicad somewhat but when it comes to designing any sort of power management I’m pretty lost.
I would build the GameCube into a console but the ports were cut off with a dremel. I took the time to desolder all the left over cut off pins from the connectors and decided I’d like to build this into a portable. The lot also came with a trimmed Wii mobo which I’ll build into something else in the future.
my question is there anything readily available online as far as power management goes or would I have to use custom regulators for every voltage line I need for the board? I’m good with an iron and can use kicad somewhat but when it comes to designing any sort of power management I’m pretty lost.
