Question Fabrication PMS

[GuiSaioro]

I’d like to have the RVL-PMS board assembled directly by JLCPCB, but I can’t find the proper BOM and CPL files formatted for their site.
Does anyone happen to have them?

 

[JamesPi]

Here's all the files on GitHub: https://github.com/Gmanmodz/RVL-Power-Management-System

Keep in mind though, that this is for the previous generation of PMS which is no longer recommended to use.
I don't believe the files you are looking for are there generated already, but you could either make them using KiCad, or if you're not sure how to do that, PM me and I'd be glad to help you out.

 

[Stitches]

Also worth keepig in mind that the PD-2/PD-3 modules from 4layertech do not work with the old v1 PMS boards. If you're going to use the old PMS, you'll have to use a 9v or 12v DC barrel jack power supply to charge it.

 

[GuiSaioro]

Also worth keepig in mind that the PD-2/PD-3 modules from 4layertech do not work with the old v1 PMS boards. If you're going to use the old PMS, you'll have to use a 9v or 12v DC barrel jack power supply to charge it.

I can use the Wii power supply for charging, that part is fine.
The problem is if I need to add more batteries.
I really wanted to use the 4Layer boards so I could have the on-screen battery and audio data.