Release DS Lite Board scans

[KreativDax]

These are the DS Lite board scans one power plain one ground and 4 trace plains I'm new to using GIMP i never even knew about gimp until the WII compendium so I'm still learning how to use gimp. I have an half ass gimp compendium made up It is unfinished cause i have been busy with work. I have Labeled Ground plain vias and Power Plain vias. Now the Power plain has 4 different voltages i have found, 3.75v, 1.21v, 1.8v, 3.3v, majority of power plain is 3.3v. I have not labeled the different section. I will get around to finishing it an upload it here for all to have and use I hope this is helpful for a lot of different projects out there.

 

[Brock]

Thank you so much for uploading these!

 

[Ceirt]

may i ask something?....

i want to connect a PAM8302a (2.0V-5.5VDC) mono amp to a dslite motherboard (i'm working on a gameboy macro).

can ask for a recommended point? , please. (and thanks )

 

[KreativDax]

may i ask something?....

i want to connect a PAM8302a (2.0V-5.5VDC) mono amp to a dslite motherboard (i'm working on a gameboy macro).

can ask for a recommended point? , please. (and thanks )

I would think u could use one of the 3.3v vias for that just use a multimeter To find one. But I all so think there was a wright up on installing an amp on here somewhere look back an see

 

[damen_red]

You are a life saver! What technique did you use to separate the PCB layers? Your scans helped at least one console avoid the scrap heap!

 

[KreativDax]

sand paper lol. Im working on switch and switch lite right now

 

[damen_red]

Any plans on schematicizing this? I can usually find schematics for most things I repair, but Nintendo stuff seems rather elusive. The DS is not worth anything to anyone, but I am an avid repair geek, would love to see if someone was reverse-engineering this.

 

[nitehack]

Any plans on schematicizing this? I can usually find schematics for most things I repair, but Nintendo stuff seems rather elusive. The DS is not worth anything to anyone, but I am an avid repair geek, would love to see if someone was reverse-engineering this.

I am doing that. It's a lot of work but now I have some parts of schematics. You can follow my work in this thread of my twitter:
Thanks so much to KreativDax

 

[KreativDax]

that’s awesome keep up the awesome work

 

[codywicker13]

These are the DS Lite board scans one power plain one ground and 4 trace plains I'm new to using GIMP i never even knew about gimp until the WII compendium so I'm still learning how to use gimp. I have an half ass gimp compendium made up It is unfinished cause i have been busy with work. I have Labeled Ground plain vias and Power Plain vias. Now the Power plain has 4 different voltages i have found, 3.75v, 1.21v, 1.8v, 3.3v, majority of power plain is 3.3v. I have not labeled the different section. I will get around to finishing it an upload it here for all to have and use I hope this is helpful for a lot of different projects out there.

thanks for your work, was able to come up with a pretty cool flex board with this!

 

[Orchasm]

Just brilliant, I am a bit like a 57 year old kid in a sweetshop, thanks

 

[JamesPi]

HI, I am looking for some info on how I can hardwire my charger cord to my ds Lite board, The charger port is shot out and I just need to hardwire the cord in. I miss playing it.

Thank you in advance.

Not sure if this is the right place to post this. I think you should make your own thread for help, it would be a lot more organized that way, rather than riding off of a board scan post. It would also probably be beneficial to you, as it will likely get more attention that way. People can look at the title and see that you need help, rather than them just seeing that someone commented on a board scan thread.