Question Best starting ps2 portable
- Thread starter Bunnizer
- Start date
Define best, are you designing it your self or using an existing design ?
AFE123
.
- Joined
- Mar 2, 2020
- Messages
- 119
- Likes
- 66
- Portables
- 1ish.
*Use standard trim
*Basic 5 inch composite(or component if you're fancy) backup camera.
*Maybe a 3d printed case if you're down to learn fusion 360 (Pretty simple to learn with time). If not, use a prebuilt case and a lot of glue.
*ps2 controller and tact switches(or use at PIC16F microcontroller with ps2plus firmware flashed)
For a beginner, don't set the bars too high. The goal is to finish the project and take everything you learned to build a better portable. Also, make sure you include everything like battery protection (if you intend on using batteries), a charging module and some knowledge of electronics and portablizing stuff in general. I made that mistake building my first portable, and found that custom regs aren't easy to work with.
*Basic 5 inch composite(or component if you're fancy) backup camera.
*Maybe a 3d printed case if you're down to learn fusion 360 (Pretty simple to learn with time). If not, use a prebuilt case and a lot of glue.
*ps2 controller and tact switches(or use at PIC16F microcontroller with ps2plus firmware flashed)
For a beginner, don't set the bars too high. The goal is to finish the project and take everything you learned to build a better portable. Also, make sure you include everything like battery protection (if you intend on using batteries), a charging module and some knowledge of electronics and portablizing stuff in general. I made that mistake building my first portable, and found that custom regs aren't easy to work with.
Bunnizer
.
- Joined
- Mar 15, 2023
- Messages
- 62
- Likes
- 10
Exist
Existing design
There’s a ps2 portable on thingiverse with all the files needed it uses a standard trim.
Or you can check mine out just know that it is not perfect, you’ll need an advance trim plus a regulator board for it to work.
www.bitbuilt.net
Or you can check mine out just know that it is not perfect, you’ll need an advance trim plus a regulator board for it to work.
Model - PS2 21700 old files
IF YOUR USING GMANS PMS THERES NO OVERHEATING ISSUES. upon further testing using my regulator board my ps2 overheats after 30 minutes, I’m currently working on a solution and will upload new bottom stl soon. releasing my ps2 portable files this one uses 2-21700 batteries and gman pms if you...
www.bitbuilt.net
