wii

Basically this is the design i'm going to. The part that really made me think if i should use emulated or not are the controllers, i want them to be like the nintendo switches. That means you could deattach them and I was also thinking of trying to make a dock, just in case i want to play on a...

It is a portable wii that looks (a bit) like a book from he outside but inside it is your typical folding wii portable. Here is a pic. should i build this (im a beginner to the modding community) or should i start with an ashida or a simpler one like that?

-An overview- I've taken inspiration from multiple users, a lot of them have shown just how small/thin handhelds can get. After flipping back in forth about what I wanted I've decided to be greedy (hence the name) and combine multiple consoles in one handheld. A raspberry pi cm4 will take care...

Hey all, I'm trying to figure out why my bluetooth relocation suddenly decided not to work, without the module connected, the trace which should be connected to pin 10 reads short to ground. I've tried to cut the trace before it arrives at the edge of the board but that didn't fix it. Visibly...

GIBCON stands for “gee I basically cut off nothing” and it exists for one reason: to revolutionise portable wii consoles. It retains all of the parts from the OMGWTF trim as well as a few extras. For example: the USB port, sensor bar, bluetooth mudule, disk drive connectors ( in case your wii...

For the last few weeks, I've gotten really interested in making a Portable Wii, and after a bit of time, I have accumulated to what I think is all of the parts and tools that I would need for a Portable Wii, including the boards from 4LayerTech and the Custom PCBs. I have decided to go for a...

HI, I managed to get the RTC Chip working with it's little battery but the time isn't correct on the Wii. I didn't find any way to change the time while being in RVLoader. I know we can do it in the Wii System but I have no idea why, I'm getting a black screen when booting to the Wii main menu...

Hey BitBuilt, finally getting around to posting this lol. About a year ago I turned my original Wii into a portable by removing the disk drive, putting a GC controller into where the disk drive used to be, attached a monitor, and some battery packs on the back. Big and clunky, I know, but I was...

I'm a huge fan of electronic projects and I really would like to do my own portable Wii. I own a 3D printer and have some skill in 3D modeling, printing, soldering, PCB conception... I've started to search for more information about how the motheboard trimming works, what components would I...

I’m going to mod my home wii with RVLoader for easier access of games, but I love the default vanilla wii menu and I want to still access it both on my home wii and my portables. How can I do this?

Ok so here is the first gwii portable in a while. I’ve already done quite a bit but better late than never. I have the pms pd led and fan all wired up with the wii ready to drop in. Rn I’m wiring up the batteries. Ps the name is to be come up with but something to do with Zelda because of the...

Wii Console Scan Contains: Wii Shell front Wii Shell Top Wii Shell Bottom Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs' in...

I have a question as I am currently planning everything out as a beginner to build the Ashida Wii Portable. I am wondering where to get the shell 3d printed for good quality and extra tools I may need besides the essentials. I have a $750 budget for everything (I'm willing to spend some more on...

I figured it was about time for me to start a worklog on here! I want to make something similar to BocuD's Swiitch 2.5, but minus the custom firmware, since that's a little outside my skillset. Planned Features: 5" IPS display RVL PMS Lite U-Amp 2 with Wii HUD controls GC+ 2 RVL PD 2 3DS...

I’ve built 2 Wii portables so far, however neither of them were of my own design. I hope to change that with this project. My overall goal for the 3-Wii is to build a highly compact, fully featured, and practical Wii portable. I have some more specific objectives that that, so here they are...

6/13/22 - Finally started work on my first portable the other day, and man was it fun. I got so wrapped up I almost forgot to write a worklog, so this is going to be a lot of stuff on the first post. First things first, the prep. I purchased a black Wii off of Ebay for around $30 usd total. It...

So ever since about September I have been hyperfixated on portables and console modding. Finally, here I am building my own. As for my first time doing this I have decided to build a Ashida. After a bunch of research I'm at 90% 80% 75% of understanding on how to build this. Anyways for my first...

I would like to build a portable and I would like to use a 3.5 inch screen, but I don’t know which one to use. I’ve been looking through old threads but I can’t find an obvious answer. I would really appreciate the help.

After months and months of procrastination, I've finally begun assembling a prototype of my Wii motherboard redesign, which I'm calling Vegas. The name is an homage to Nintendo's naming scheme for the Wii's chipset (Broadway and Hollywood, both famous hubs of entertainment in the US). I designed...

which 3D printing software should I use? I don’t know which one would be a good one to design for my wii portable. Any suggestions? (Edited)