ps2

Hey, absolute beginner here! I want to build a PS2 portable (from a SCPH-75004), but I have some concerns. I'm looking to slowly work my way into portablizing the console, starting with making it independent from wall power. Now what I need to know is, how would I exactly do this? I know I'd...

Greetings people, i hope your good. Today I searched to see if I could give me a hand with this that happened to me about a week ago... my nephew had a PS2 Slim, he take it to repair and also mod it (I'm not sure that's how it's written), to play pirate games, and after 2 months, the guy...

Hello! Welcome to my PlayStation 2 laptop worklog, The reason behind this particular project is because of the PS2 model i have, SCPH-90004, It has a bigger motherboard than the usual 790001, Beside that, The Composite for some reason really shows a good picture and components cable doesnt work...

I currently am working on improving my PlayStation 2 portable and I would like to be able to use a microcontroller instead of using a ps2 controller. I have a teensy 3.2 that I was hoping to use instead. Is there was any way to program this microcontroller to output what is needed to make a...

hello, could someone help me? I have a ps2 fat scph50011 with motherboard gh26. I've had it for a long time, but about 5 years ago I stopped using it for lack of time. A few months ago I tried to use it again, but when I turned it on the image looked bad, so I restarted it but took out a spark...

So it's finally time to post this project in this section I believe. It's been quite a while since I started this project and it kind of evolve over the years. From thinking of using DVD drive all the way back in 2013 to looking into obscure hard drive setup for the slim, experimenting with...

Hello all, I finally feel that the Ps2+ is in a state that I can release to the public. The open-source project is located here: https://github.com/mcranford13/Ps2Plus. This project is meant to replace the PS2 Dualshock controllers and hopefully open the way for more ps2 portables. There has...

I have been trying for a long time to find a way to hook up my Playstation 2 to my LCD monitor. I've used the LM1881 circuit, but it didn't work due to the fact that it outputs c-sync instead of RGBHV. Then one day I found this thread: https://shmups.system11.org/viewtopic.php?f=6&t=60996 that...

Hello! As you saw in the title, I need help with this battery scheme. I need you to confirm your is well structured. To consider; each battery of the following scheme will be in an individual battery compartment. The batteries will be charged with a specific battery charger, so you will have to...

Hello! I'm in the middle of a PORTABLE PS2 project. This modification will use three 18650 batteries of 3.7 and 2200mAh to make 11.1v and then regulate it to 8.5v directly to the power port of the PS2. It should be noted that it is a SCPH-90010. I will charge the batteries with a 2.1mm jack...

Hello everyone, given that this is my first PS2 portable project, I wanted to know some tips on how to do this at both the video level and the sound level. First of all, at the time I wanted to increase, and to decrease the volume using keys without a potentiometer, only keys I wanted to know...

So I have just received a ps2 model 79001(the mobo layout is more like 79003 however). I applied DC power of 8.5v to the positive pin of the barrel jack and the negative to a ground near a mounting hole on the motherboard. So far I have been unable to get even an a red standby LED to show. I've...

From the department of "don't worry, I'm dumb enough to give it a go"; I've put JLCPCB hard at work This outline is for 7" 800*600 displays such as A070SN01 etc. I did alternative bottom tiles dimensioned for the 6.5", 800*480 AT065TN14 All broken up into <10x10cm tiles to take...

Working on two ps2 portables atm started the second due to the fact im waiting on the case and my Dremel set to finish the first one.so far I made a few awesome discoveries on the 2nd portable though! all images are from the second project which uses a 50001 motherboard. ( hit a brick wall...

Hello all, So typically I've finished my PS2p and was left thinking "I wish the insides were cleaner" and then had a crazy idea that'd require me to make my own PCB for handling the controller to come up with a solution. Simple question: -Are there any PCB files for the PS2 controller freely...

Hey everyone! I've been lurking for a while now and I have decided I'm finally going to start a worklog! I'm not sure what I'm going to call this one (you Wii people have good names I'm jealous) but here's what it's going to include: 6 18650s, adding up to a 10200 Mah 7.4 volt battery pack...

So I was taking stock of the carnage on my workbench after the last PS2 portable when I started thinking about a project I'd been tinkering with, which was a Raspberry Pi portable inside a Wii U. See I'd collected most of the stuff to do it, I had the screen, and the external phone charger I...

Hi, how are you? I want to create a ps2 portable, but I'm new and I don't know a lot of how to cut the motherboard, I would like if someone could help me. Here there are some photos of my ps2 motherboard

While playing with this setup I was taking some notes an though compiling this into a step by step guide would benefit the community more than sitting on my laptop so after a bit of effort there it is. This guide will help you setting up a Raspberry Pi to stream games to a PS2. The point of...

So after a short break of… around 4 years I finally got the time/ motivation to finish my PS2 portable. I couldn’t stand seeing this half finish case staring back at me, like a ghost of the modding past (see what I did there), begging to be completed. For reference this is the link to old post...