ps2

So, you guys were very helpful the last time I posted. Happy to report that I've made great progress since then. 1. unrelated, but I made an apex legends rgb brightness adjustable lamp. print size was off but Im satisfied 2. anyways. Made a 2P2S power supply. all batteries are 21700 3.7v...

Hello, I am building a PS2 portable (following customledmods build with a 5" display) I had no issues until the point that I installed the sticks into the controller board (one of the open source PS2+ boards, sourced here on bitbuilt) I connected the joycon in reverse polarity (as directed...

I've been using these forums for a while now, and finally decided to make an account and try my hand at this year's summer contest. I know a lot of people on these forums like to create portables, but I decided to go a different route. I am going to attempt (I hope successfully) to create "The...

Hey all! I've been following the trimming guide, as well as a few others between the forums and the world wide web, but this one's got me stumped. I wired up my FMCB memory card to my trimmed board (790001, if it matters) and when 3.5v is applied, the chip on the memory card gets excruciatingly...

I figure it's a good time as any, I'd like to announce this project to the forums. I've been working on this off-and-on for a few months now and figure it might be useful for a few folks here. Project Kunai is an open source emulator for Dualshock controllers using the RP2040 microcontroller...

Hello guys! So I was following the forum after stumbling upon Tito's video for the PS2 Ultra Slim mod and I was hesitant to do this myself as I have little to no experience soldering and console mods. After doing some simple soldering on defective hardware I finally musterd up the confidence to...

A Custom PlayStation 2 Portable from Scratch About this Project This is a PlayStation 2 portable, custom designed from the gound up with a strong focus on ergonomics and usability. It contains presumably world's first custom reverse engineered PS2 mainboard not made by Sony, and is only...

Figured I would post this here, as I can't figure out what's wrong with both of these boards. I bought them both from eBay as "Parts Only/Not Working", which is fine. I've checked multiple ports with a multimeter, and I cannot seem to figure out where the issue is. I figured i could post the...

First off,I do hope i'm posting this in the right place. So, I'm planning on building the PS2 Ultra Slim developed by Wesk. This would be my first "big" build since working on nothing other than Game Boys. And as I was planning everything out, and looking up the parts and pieces, I thought it...

Hey folks, I'm hoping to recruit the help of some of you smart fellas. I recently was given 2 guitar hero world tour guitars for the ps2 but did not get the receivers for them. Upon looking locally or on ebay etc. These dongles run about $50 - $70 (which is insane). I've googled around for a...

I have decided to make a portable PS2 based on Gman's trimming guide, I haven't defined the trimming type yet. First I will disassemble the console and see what modifications I make to it. I share some images of the beginning of the work, I will return soon to comment on progress.

Hello, I have my PS2 that worked well, it was stored for 3 or 4 years and now it does not provide video or sound, the console turns on everything normally, what could it be? What components should I check, what voltages should I measure? Thank you all. I leave photos of the console

PS2 Eye Toy Scan Contains: PS2 Eye Toy Top Shell PS2 Eye Toy Bottom Shell PS2 Eye Toy Base PS2 Eye Toy Focus Ring Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object...

Namco Guncon 2 Scan Contains: Namco Guncon 2 Right Shell Namco Guncon 2 Left Shell Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs'...

I read somewhere that a lot of PS2 games ran on UE2 and I was wondering if a version with PS2 compile compatibility built in somewhere on the internet??

# PS2DMG - Contest Entry 2022 - Worklog ## Prologue Actually I wanted to wait with the Worklog, until I have successfully relocated the Video DAC chip on a PS2.. but since I already put so much work into the designing process, I think it's about time to let you guys know what i'm working on...

PS2 Dual Shock 2 Controller Scan Contains: PS2 Dual Shock 2 Controller Front PS2 Dual Shock 2 Controller Back Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then...

PS2 Slim Console Scan (79k) Contains: PS2 Slim Console Lid Scan PS2 Slim Console Top Scan PS2 Slim Console Bottom Scan Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the...

IT IS DONE! It has been a lot of troubleshooting and painting but I finally have a working portable. I added an Arduino Nano as a basic battery fuel gauge. It is just measuring the battery voltage and lighting up the led based on the voltage. It was also supposed to auto reset the PS2 when...

Hello! I've never posted here before, and I've also never used a soldering iron before either, so there's a good chance that the solution to this is very simple - however, a brief search didn't help, so I thought I would ask here. Basically, I'm currently converting a regular (third party) PS2...