Search results

First,you ALWAYS need to set off the battery when you are soldering something.I think your pms is not dead,it already happen to others guys on bitbuilt.I will say to first clean up your pms to make sure there are not some residues of solder.After that, put the battery inside your console and see...

Hey all,sorry for the super long silence,I was to the land of freedom(that's what they say all) And I was also focusing on my g-boy(who still got problem)so,you know,don't have a lot of time for the WIIrtop,but it's over now and I'm in full go mode on this project,you will heard of me in the...

Wow,looks crazy dude, congratulations for the Amazing work you done on it!

Damn man,I really like this slide controller,looks crazy!Good luck for finish it :)

Well,I'm not sure if it will works because you almost cut the 1.15v regulator on the bottom of the Wii Also,be sure to clean your board,it seems uou got some rest of soldering flux

Hey guys,with a lot of help from @Xenii,I can now have an (almost) fonctionnal controller.Yeah almost because my joystick were not good :\,so,they aren't functionnal.I buy new joysticks which will arrive soon.I also perform a bluetooth relocation,but still need to test it. See you soon for the...

Want to install newer Super Mario Bross Wii? I Think it just something you can install in the Wii menu,I dot think it's specific at rvloader but you can still access to the wii menu with rvloader,so I think if you want to do a portable it should be good

Wow,what a crazy work @Xenii,I'm really excited to see your final kit!We are definetly going into a new era for the kits for portables console with your kit and the n64 kit of @Downing !<3

I will love to see your custom wiimote case.Customs controllers are Always crazy! By the way,this @Jimenick got a similar project. https://bitbuilt.net/forums/threads/joycon-wii-remote.6960/

1.For building an ashida,you can actually ask @cy who is doing commissions for 3d cases or you can just put the files on pcbway or jlcpcb. 2.The ashida and the Xii boy ultra are (I think)the easiest portables to build when you begin. 3.I didn't really listen to the controller,but I think it's...

Heyo all,since too much Time since the last update and that's not good,so today,I get hours of work on it,trimm a new wii aaaaand It works! Well I say it works but the controller isn't working,but at least,I've got image and pms pd 3 is working prooerly like the pms 2. Is anybody got an idea of...

Yeah thats what I mean for the pads on Wii.I do that for my précédent Wii and it was working so I think it's like that we need to do:?: By the way,why did you not remove the voltage regulators at the right of the Wii? I'm not an expert but I take a lot m'y informations from this vidéo,si...

Hello,you need to sold your ground wires on 2 different ports.If it's still not working,check this You also forgot to properly wire the composite câbles like this: Hope it helps :)

Yes that's it for the 3.3v line but please post pictures and check the continuity between your lined.Sometimes,the problem is just a bad solder joint.I dont really understand what you want to do with your switch for force the cpu ton boot,but you don't really need one normaly because it's the...

Hello, I can't really say what is your problem but I recommend to check first this post https://bitbuilt.net/forums/index.php?threads/rough-draft-u10-troubleshooting-guide.2317/ Hope it help :) (And please post pictures)

Hello all, new update is here ! I finally decide of the placement of the wii inside the portable,it looks a bit weird but it should work,so that's okay.With that design,the wii motherboard will be mount on a slab,refresh by two heatsink of 35x35x10 mm(the same as in the ashida). I also decide...

Hey all !Too much time has passed since the last post so,here it is ! I finallly finish the shoulder buttons pcb who know got the start button on it and modify the 3d file I also finalize the pms pd port And now I just need to finish a few things like the sensor bar pcb and the screen...

Hey all,don't post since a long time because I'm (trying) to finish my g-boy (and it's exams month,you know). Since the last time, I finally decide of the placement of the battery and the pms 2 It looks a little weird,but,with that design,I'm able to put 4 18650 batteries. After some work on...

I am using a dell portable computer which work fines for everything and a normal USB c tonisb cable.I also tried 2 différent usb c to USB câble for make sûre it was not the problem.

Hey all,last year,I bought a pms-pd3 to create a g-boy(which is still in progress)but,I have some problems with it: -I can't read the micro sd card from my computer with the pms (but that's not the fault of the micro sd card which is working fine) -The d+ and d- ports are not working for me I...