Stitches

Short Update: Redesigned the shell - it's few millimeters thinner at the cost of making it a few millimeters larger LxW but it now...

Damn, it's been almost a month. I have a lot to share with you all, I've just been pretty busy with work lately. We left off last time...

Been a minute since my last update due to a bit of life chaos irl (lost my job a couple weeks ago so I've been going pretty heavy into...

Small update: Late night hardware work has been temporarily interrupted by two new quality-control inspectors. The PCB seems to have...

If the controller audio binds work properly then yeah you can leave it

Something is very wrong then. The middle leg should be reading 1.8v or less

Are the PMS SCW/SDW wires connected to the Wii properly? If the PMS can't communicate with the Wii it can't pass along the volume wheel...

The RVL-AMP doesn't have an ADC to handle analog volume control, you gotta use the spare ADC on the PMS instead If you have the older...

Oh shit this is actually happening

Mini update: After only like 3 or 4 hours of work over the course of a couple days, I have another working omega trimI My butt cheeks...

Update 3: slow and steady Progress: 70% Ok, so not too much has happened since the last update. I seem to be in a late game stage...

I didn't realize you had modeled your own connector when you were showing it off the other day. That looks super clean dude!

8/20/26: Since I'm waiting for the PCBs to be manufactured and shipped, I thought I should start working on the case and cable for the...

8/18/26: The Hall-Effect analog sticks have arrived. I replaced the current analog stick that I had with the new one. Note: the reason...

It's always smart to test your circuits like you did here whenever you're able to! This is something I always try to do when it doesn't...