Worklog WII GOmega

Joined
Nov 9, 2017
Messages
735
Likes
678
Location
CA
Portables
8
features
  • Psp go style
    First portable with slide feature?
  • PSP go analogs (if I can get them to work) if not joycon analogs
  • Custom pcb carrier board to hold all 4Layertech boards
  • Omega trim
  • Custom fan possibly
  • 3.5” hdmi display with glass cover (might look into the laminated lcd)
  • Batteries i have no clue since I’ll have very limited space
  • I was thinking of using the original display ribbon cable

DAY 1-
IMG_6183.jpeg
IMG_6188.jpeg
 
Last edited by a moderator:
Joined
Feb 18, 2024
Messages
119
Likes
60
Portables
working on No.1
Extra Portable Portable Wii coming right up!
 
Joined
Nov 9, 2017
Messages
735
Likes
678
Location
CA
Portables
8
Yes! This is hot. Been wanting to make a portable with slide mechanism, excited to see how you implement everything.

This place sells just the hinge alone so you don't have to buy a whole housing kit. Only a few left apparently.

https://kasynparts.com/product/slid...y-psp-go-console-aluminium-metal-replacement/
Thanks drew, I originally planned to make a ps2 portable instead of the Wii but since I trimmed my first omega I knew then I wanted the Wii portable.

thanks for link, I do have a couple spare ones from previous psp go’s I’ve taken apart. Btw the design is pretty much the same size as psp go the only difference will be the thickness.
 
Joined
Nov 9, 2017
Messages
735
Likes
678
Location
CA
Portables
8
Ohh yea :D Well hopefully I can get them working if not I’ll use joycon analogs.
 

Thomothy

.
.
Joined
Jul 31, 2022
Messages
62
Likes
79
Location
Oregon
I haven't messed with psps too much how similar is the gos analog to the switch or 3ds? They look like they click?
 
Joined
Nov 9, 2017
Messages
735
Likes
678
Location
CA
Portables
8
SMALL UPDATE

I’m almost done with design I just have alot of test prints to do, the design is not a 100% copy of the original psp go but I am keeping a lot of its features.

Another thing is if I can’t create the carrier board this design will be pointless.

might add these features

MX chip on carrier board
Bluetooth module
Fujiflex by @YveltalGriffin
Power strip by @loopj

My plan is to release all files/pcbs once finished.
IMG_6286.jpeg
IMG_6287.jpeg
IMG_6289.jpeg
 
Top