sdouyoulink Site logs

Joined
Oct 28, 2023
Messages
70
Likes
20
After trimming the Wii, how much current is needed for each channel to start?
 
Joined
Oct 28, 2023
Messages
70
Likes
20
I want to continue using the boot function on the Wii motherboard, what should I port
 
Joined
Oct 28, 2023
Messages
70
Likes
20
It's just that the MX chip doesn't manage the boot of the Wii, and I want to transplant it to the handheld
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
.
Joined
Feb 5, 2017
Messages
3,918
Likes
3,078
Location
Banana Bender Land, Australia
Portables
6
I am still confused as to what you're asking. When a Wii is trimmed, the MX chip is no longer able to control the power state of the Wii due to the 3.3v standby line being cut and unused. You can relocate the MX chip for the font data and real time clock functionality, but restoring the original Wii power button behaviour isn't possible as far as I know. Once a Wii is trimmed, it will always turn on when voltage is supplied.
 
Joined
Oct 28, 2023
Messages
70
Likes
20
I am still confused as to what you're asking. When a Wii is trimmed, the MX chip is no longer able to control the power state of the Wii due to the 3.3v standby line being cut and unused. You can relocate the MX chip for the font data and real time clock functionality, but restoring the original Wii power button behaviour isn't possible as far as I know. Once a Wii is trimmed, it will always turn on when voltage is supplied.
Can I control the boot of the wii by controlling the U10 on/off
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
.
Joined
Feb 5, 2017
Messages
3,918
Likes
3,078
Location
Banana Bender Land, Australia
Portables
6
No. The Wii turns on and consumes power when voltage is supplied by the regulators even if the U10 signal is not present. If you want to control the Wii's power state, you'll have to put a power switch between the batteries and the regulators (this is assuming that you aren't using a regulator solution that already has a power button, like the RVL-PMS)
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
.
Joined
Feb 5, 2017
Messages
3,918
Likes
3,078
Location
Banana Bender Land, Australia
Portables
6
It could be corrupt files, could be that you made a mistake during installation
 
Joined
Oct 28, 2023
Messages
70
Likes
20
Why did I choose RVLoader v1.6 in the homebrew channel interface, it only shows a black screen
 

Stitches

2 and a Half Dollarydoos
Staff member
.
.
.
Joined
Feb 5, 2017
Messages
3,918
Likes
3,078
Location
Banana Bender Land, Australia
Portables
6
RVLoader can be reinstalled at any time if the system is able to boot
 
Joined
Aug 2, 2016
Messages
294
Likes
144
I'm a little puzzled with all of the questions that sound a little unnecessary? What exactly are you looking to do?
 
Joined
Oct 28, 2023
Messages
70
Likes
20
Hello everyone

I LOOKED AT THE FORUMS AND DIDN'T SEE ANY OPEN SOURCE FILES LIKE ASHIDA PCB SET, SO I HAD TIME TO MAKE A MODIFIED PCB TODAY

ee5578083c9fda96f0ba2a7a9dab518.png
The file is drawn using JLC EDA and you will need to open the file using JLC EDA Professional


微信图片_20240509114930.jpg
The source file has been uploaded to my github power module file, and you can download what you need
Swioamsd/Wii-电源模块 (github.com)
 
Top