Help help help

[washingtonsantana]

Good night I need urgent help, I want to know if for the controls to work you need to have these resistors? I damaged some while trying to solder the controls and now nothing has worked.

 

[washingtonsantana]

Good night I need urgent help, I want to know if for the controls to work you need to have these resistors? I damaged some while trying to solder the controls and now nothing has worked.

 

[Customledmods]

Can you upload a clearer picture? Also have you connected 3.5v to the controller? Upload a picture of the controller your using

 

[washingtonsantana]

yes connect 3v and 8v from the vibration and it doesn't work, i believe the reason is the resistors i accidentally removed

 

[destroyer12]

Do you have the joysticks connected to the controller? It will not work without them

 

[AFE123]

I might be wrong on this, but I think you wired up the controller to the player 2 stuff. Also, I also think that you have a little too much copper exposed. One more thing, you don't have to solder the wires directly to the resistor. There are exposed copper pads you can solder to.

Here's a pic of what my controller relocation looks like.

I'll post better pics whenever I get to it.


Edit:

 

[Customledmods]

yes connect 3v and 8v from the vibration and it doesn't work, i believe the reason is the resistors i accidentally removed

You need to clean up all those solder blobs also it looks like a lot of those connections are shorting, 8.5v is only needed for rumble. Here’s a picture of my wiring I’m using a similar controller hope it works.

 

[washingtonsantana]

You need to clean up all those solder blobs also it looks like a lot of those connections are shorting, 8.5v is only needed for rumble. Here’s a picture of my wiring I’m using a similar controller hope it works. View attachment 24975

friend I soldered in slot 2 to test, if you see in my photo I destroyed several resistors and capacitor, maybe that's why it doesn't work,

 

[Customledmods]

Yea I saw you’ll have to follow the connections higher up and solder directly onto the vías, scratch off the solder mask hopefully that works

 

[washingtonsantana]

Sim, eu vi que você terá que seguir as conexões mais acima e soldar diretamente nas vias, raspar a máscara de solda, espero que funcione
[/CITAR]
I believe it doesn't work without the resistors I've already tested the control on but it doesn't respond to commands

 

[Customledmods]

Make sure nothing is shorting