Search results

Credit to banjokazooie for originally designing this file Unfortunately it isn't hosted anywhere anymore so I had to recreate it This is a board meant to sit behind the display and replace the original cage, which takes up too much space anyway It is by no means perfect yet, and some details...

Just wondering if anyone has used battery sizes other than 18650s (or lipos) in their portables. I was thinking of using 4 21700s (LG) in series for my pack to get 14.8 V 5000 mAh. Now, while my current pack is by no means good or power dense (2000 mAh/cell, 16 cells series), using these...

Is there a reason that nobody is doing this?: If making your flash drive hidden but accessible was a goal, something like this would be perfect. This is a 128gb drive by SanDisk and runs Wii games in wbfs format just fine. It was only 20$, and since the Wii won't use the drive at 100%...

So, I've been trying to start on a "portable Wii" and this will be my first work log of sorts. Basing some of it on this: https://www.instructables.com/id/NintenWii-Wii-re-done-for-NES-case/ The plan is to put the Wii and everything I need into an NES shell, no disk drive but inside the...

Anyone know what these are and what they are used for. The label on the side has been smudged off. The black one is 20 pin and the red one is 5 pin.

So I was looking through my garage and found a UPS of sorts. Its a 12V UPS (DC output) and uses a 12V motorcycle battery (GP 1272 f2). It's been in my garage for a couple of years at least. The problem is that this 12V battery is sitting at around 6.5 volts. After a day of charging its at 7.5...

Note: This is essentially a condensed and less convoluted version of my first post (in the Console Modding section). If you want a full description of the situation go there. My question is, given three different voltage sources (around 0.1-0.2V difference), how would you balance/equalize them...

Problem Solved Solution: don't be dumb