Recent content by sl33pydog

That is the stockiest stocky solidoodle ;). Surprised you haven't upgraded parts on it. Like everyone else this should look awesome once it's done.

So found some tiny rumble motors at microcenter that run off of 3v. They are the perfect size for a portable....like <10mm in diameter and 4mm thick. The problem is I don't know if putting 3.3v with a resister to bring it down to 3v, if it's necessary, instead of 5v on the controller line...

About 230x130x60mm. That's a 5.6" screen

Thanks AC. Sneak peak at what I'm up to. The orangish blob is a 3d scan I did of the cut board with heat sinks/fan. Hopefully by next weekend I'll have some of the case started. I'm going to start small sections at a time then print them. Going to figure out the analogue triggers first.

Thanks guys. Should have an update soon or at least cad models. I started my first hobby again, drones so I have multiple projects at once. I need 3 days at least a week to work on my stuff.

Thanks guys for steering me towards the answer. I completely forgot about the c rating on batteries and the voltage drop. These batteries came with an unfinished portable that I stripped for parts and they aren't marked. Either they are old or have a 1c rating because I had them charged at 8V...

So I picked up two pcms from battery space rated for 6a on a 2 cell system (http://www.batteryspace.com/pcbfor74vli-ionbatterypack8alimitwithfuelguagesocket.aspx). I shouldn't be getting that high of amperage through my gamecube but for some reason I can only get about 2 seconds before the...

So you guys might know I was having sound amp issues and I tried lots of different ones and I kept realizing that these amps are loud. My audio coming direct from the GC was too low and these amplifiers are for 3W 4ohm speakers. So things became difficult. I looked at moopers board since I...

So with new shielded wire and a new amp that was hidden in some usb powered aux in speakers it works with no interference. YAY. Thanks everyone for the help. Sorry this scratched brains.

I wasn't able to get good shielded wire at any of the box stores but I took apart an 1/8th stereo cable which served kind of the same purpose and it made things really manageable. Thank you ShockSlayer B|. Seems you had this same dilemma with Tchay many many moons back. So I'm guessing my...

@cheese it might be both I have checked two different cheap pam8403 amps and they both have the same issue. @Aurelio tried it with two speakers and headphones @Noah no fans at this point to see if they were producing noise. @ShockSlayer Are you saying every single wire is grounded? The legs...

tried that and on a new gamecube....same thing. This is another strange part. So it's louder when I turn the volume up (duh on my part) but when I put the volume to min I can't hear the gamecube but I can still hear the buzzing but only slightly. Is this the dc offset you were talking about?

same thing. Buzzing noise.

I have a korad power supply to my gc regs on the pcb I made.