MWD_NAME's latest activity

  • MWD_NAME replied to the thread 4Layer Product Line Update.
    Just bought a new PMS-Lite!! Can't wait to finally get my portable up and running
  • MWD_NAME replied to the thread Beginner Wii Portable.
    I’m waiting on components, (4-6 weeks) and so until then, there’ll be no activity on this thread from my end. I’ll update when the...
  • MWD_NAME replied to the thread Beginner Wii Portable.
    Ok, just a quick question. Do you need scd and Scw connected for the wii to post?
  • MWD_NAME replied to the thread Beginner Wii Portable.
    Good news! I've fixed the short! Here are my readings now. I'm going to hook the wii up to the pms properly now, with good wire.
    • Screenshot 2022-07-24 at 12.27.26.png
  • MWD_NAME replied to the thread Beginner Wii Portable.
    Okay, I have an RVK-001 board and these were the resistances I measured. I'm sorry about all the listings. Will delete some of them. Are...
    • Screenshot 2022-07-23 at 17.20.51.png
  • MWD_NAME reacted to Customledmods's post in the thread Beginner Wii Portable with Like Like.
    Those pictures did not help but I would check the connections again some look like they’re shorting like charge/gnd. Also use thicker...
  • MWD_NAME replied to the thread Beginner Wii Portable.
    On the Wii, 3.3v and ground are shorting somewhere
  • MWD_NAME replied to the thread Beginner Wii Portable.
    Here are the best images I can get at the moment. May come back with more later. The button isn’t doing anything, do I need the wii...
    • 0A779F9C-354A-49EB-8622-1C9B645BD4B8.jpeg
    • 87CB2929-359A-4062-8DE5-34748A5A2FCC.jpeg
    • 809C6EBC-5711-42E9-92CF-310702312D39.jpeg
    • AE41B048-67BF-4FE2-86DB-9BCCFAE9B238.jpeg
    • FC544ADC-7E9F-4EBE-A64B-8B4A8A1F63FB.jpeg
    • 9D48ED11-A62D-4AFD-9863-3D48E70009AC.jpeg
  • MWD_NAME replied to the thread Beginner Wii Portable.
    The wiring is very thin because it’s just for testing. I click quickly and hold the power button without the Wii connected and it does...
    • 85095F61-6B05-4DA1-8061-C7BD2619880C.jpeg
    • 503FC2F0-B41A-4C27-B5FF-1AB43F77F4F2.jpeg
  • MWD_NAME replied to the thread Beginner Wii Portable.
    Ok, so bad news, I hooked up the pms lite to the trimmed wii and it started smoking. Don’t know which bit, but I’m worried. Also, should...
  • MWD_NAME replied to the thread Beginner Wii Portable.
    I don’t know specifically for the Louii, but in general 30 gauge magnet wire will do for most things and for large power places (battery...
  • MWD_NAME replied to the thread Beginner Wii Portable.
    Does anybody know the best way to deal with bad button holes (made to tight tolerances so now they stick) should I just sand down the...
  • MWD_NAME replied to the thread Beginner Wii Portable.
    This probably isn’t the thread for this, but most of the stuff you need is on 4 layer tech. You will need a PMS, U-AMP, PMS-PD and a GC+...
  • MWD_NAME replied to the thread Beginner Wii Portable.
    I’m sorry, but I chose a UK one. I used Lancashire 3d but I don’t know what’s good in the US.
  • MWD_NAME replied to the thread Beginner Wii Portable.
    PETG I got it outsourced because I don’t own a 3D printer
Top