Recent content by mrcarembole

And the story continues (rather a big late but well ~~) For now i've fried 2boards so far, but did some progress, and i have all the parts (except one that will come in the mail in the next few days) I've bought the L7009 LCD from dx, and i was wondering if the RGB output from the ps2 would...

Yeah i know that but i was expecting my order to be atleast marked as shipping after 3-4weeks :-)

Still waiting for news of my ide mod, ordered the 11th of september and still marked as processing, i had no luck sending an email and getting a reply :-\

Thanks for the info, and nice to see you getting back to the 70000 : ), i've already ordered the FPC + board though, Regarding your guide i've already read it, and also i've read every other guide that could be of interest :) Do you know if there are any other IC's on the 70000 that can be...

Yup seems like a better idea, nearly forgot the FPC's, as i have ordered them but still no new in the mail, and a big plus to the fact that only one side would be trimed, by the way, what is the role of the big chip you cutted of ? Also is there anything i need to remove on the board or to...

Just got the screen in the mail, and good news, 12v goes in, but to a 5v regulator, and i've successfully powered it from a 5v power supply : ) Was choosing the case i will be working with, ill take either https://www.polycase.com/zn-40 or https://www.polycase.com/zn-45 but i will have to trim...

yeah thats why i am going to modify the connector, or maybe ill just take a 85w macbook powersupply and wire it the same way ~~

Its reversible in the way that its symetrical Here is the original pinout http://pinoutguide.com/visual/gen/magsafe_power.jpg

Well im a going to repurpose an apple magsafe connector (which has 5pins) and modify it a bit so it can only be used to power my build, and it will give two different power, one will be from the small CC CV charger so 12.6v, and the other will power up the device while the battery will be...

was refering to it as a 12.6v 1.5Amp (since it can be regulated) charger board. With a mofset to disconnect the battery from load and a 15V DC power supply to supply both the charging board and the system to make a charge and play thinggy Im wondering how much more efficient are the PTN's...

Found this little babys, looks interesting : http://www.ebay.com/itm/DC-DC-CC-CV-Lithium-Converter-Step-down-Power-Supply-Module-5-32V-to-0-8-30-0-5A-/132266054569?hash=item1ecbabd3a9:g:hBcAAOSwWdZZZIRW

Dumb question, but im unable to answer it myself ~~ If i purchase this : http://www.ebay.com/itm/3S-25A-11-1V-12-6V-W-Balance-18650-Li-ion-Lithium-Battery-PCB-Protection-Board-/322598601108?hash=item4b1c600194:g:upMAAOSwC8FZbVKv I would still need a charger to apply 12.6v on it to charge the...

Ok i will check those out, need to find one that will allow charge and play, or work something out to have charge and play on one port :)

Anyone know a european CMB seller ? i was going to buy this one from batteryspace : http://www.batteryspace.com/CMB-for-11.1V-Li-Ion-Battery-Pack-10A-limit-RoHS-Compliant-with-DC-char.aspx but its going to cost me 50$ of shipping (thus having to pay more for shipping than the actual good, which...

most of the game i will play on this have widescreen support or are fine even if distorted