So I still need to wire up a usb port but don't have any solder right now but was wondering if I could just connect the screen board to the 12v from the Wii PSU brick till I get the batteries etc or is the amperage to high
I wasn't planning to use tablet batteries as I thought they were more expensive and dangerous. I don't have any laptop batteries that still hold charge to spare but there is a local place that sells 18650 and if I buy a battery holder and wire them all up to the BMS etc. I didn't even realise I...
I don't really know how to wire VGA and I would need to install rvloader which I don't plan to do.
My plan to power it is lion 18650 cells I will have to see how much room is free.
So after numerous delays the screen arrived it runs on my laptop usb but not on my Wii or plug I guess I have to remove a regulator wondering how to do that
The disc drive doesn't really have any advantages and you can probably extract the roms from your discs on a Dreamcast. And the battery life will be a lot less
I presumed plugging it into the Wiis usb port would provide sufficient power but I guess I'll wait till it arrives. If it does require 12 volts I'll try bypassing the Stepdown regulator.
I am in the process of building a Wii portable. It will be in the standard Wii shell. The screen is going to be https://www.ebay.ie/itm/126148011347?mkcid=16&mkevt=1&mkrid=5282-175127-2357-0&ssspo=zhwkb4s_sqo&sssrc=4429486&ssuid=_dev8xjosje&var=&widget_ver=artemis&media=EMAIL which should work...