Well, you should twist them up, and tight.no I soldered straight without twisting
Try using thinner wire, I used 32 awg magnet wire and it worked for me.did not work
Use thicker wire for the negative and positive on the usb. And thin wire for the data linesI tested it but it didn't work is the wire too long?
Hey desolder the wires for the usb off motherboard then clean it really good with alcohol. After that the soldering hereI tried with thicker threads but it didn't work
No hey did you sand the edges ?did not work the pendrive nor starts it seems to be short do you need to put bluetooth or wifi on the board too to work?
Do not power the board until you know for certain there’s no shorts. Also check your wii resistance https://bitbuilt.net/forums/index.php?threads/wii-trim-resistances.2602/I sanded a little more but it didn't work
I’m just saying, I’m about done with my first wii portable and i followed all these steps so far I have no issuesit worked with another pendrive I tested about 7