my first ps2 portable parts
- 7 inch 1024x600
- ps2 79005
- usb pd type c 9v
- 2s cmb
- 5000mah lipo x2
- 7 inch 1024x600
- ps2 79005
- usb pd type c 9v
- 2s cmb
- 5000mah lipo x2
Last edited:
For your screen if you provide a bit more info someone can recommended what video to use. For VGA from the PS2 it's actually a not so widely supported 15kz VGA interlaced so most new display won't accept that video.I made a case and tested my monitor several times, but unfortunately neither vga(rgb) nor Ypbpr appeared on my screen.
So I decided to just use the composite.
I have a question. How do I turn on Ps2 automatically?
In my knowledge, I don't know how to turn on ps2 automatically.
I thought, "Should we make a separate ps2 power switch?" But I don't think so when I see other people making it.
If I understand correctly, I can solder the reset pin and ground pin with wires and short them, right?For the PS2 power button, the PS2 will always need a signal/button press on the reset pin to turn on the reason you'll see some builds automated is due to the PS2 PMS from the BB store had a programed signal to do this on boot for convenience.