Board scan DS fat / DS lite / DSI pcb scan and schematic

gorgyrip

.
Joined
Feb 13, 2020
Messages
19
Likes
22
Last edited:
I'm glad that some people find it useful. I hope in the summer I will release it also for dsl.
 
gorgyrip said:
I've scanned the pcb for ntr-cpu-10 and made a schematic.
You can find all the files here:

Dropbox

www.dropbox.com www.dropbox.com

If you can help with part identification an symbols, please let me know.
Click to expand...
Excellent work, it is very important to keep these scans and acquired information alive on old consoles.
 
Thank you for your kind words!
I added ds lite USG-CPU-10.
 
Last edited:
:) It took a little over 400 hours. The traces needs to be smoothened, but I will leave it as it is, since my intention was to be a visualizer, not for manufacturing.
I have zero electronic experience so I hope someone can take a look at the symbols for mosfets/transistors and see if I identified the parts correctly. The connections are 100% correct.
 
Last edited:
Incredible work on all 3 of these schematics and boards!
I have a fairly good 3D model of the DS lite slot 1 cart connector that I can double check and share if you'd like to include stuff like that.
So many possibilities with these, like a DSi with the second DS cart slot!?
Thank you so much for posting these!
 
I have never used 3d models in eagle. It's a good idea, but i'll have to also look for models for the rest of the parts.
 
Amazing work indeed! I was wondering if there was another way to open the schematics if u don't have Eagle.
Also, could I ask what was ur process for recognizing most of the components ?
 
Last edited:
Eagle Is free.
You can find the components by their code. There are codes databases, but I couldn't find many parts there. Luckily nintendo used Toshiba for most parts, so I browsed their datasheets until i found them :) Again, I'm not sure if I identified them correctly.
 
gorgyrip said:
Eagle Is free.
You can find the components by their code. There are codes databases, but I couldn't find many parts there. Luckily nintendo used Toshiba for most parts, so I browsed their datasheets until i found them :) Again, I'm not sure if I identified them correctly.
Click to expand...

I'll look into it, thanks again !!
 
Kamp said:
Incredible work on all 3 of these schematics and boards!
I have a fairly good 3D model of the DS lite slot 1 cart connector that I can double check and share if you'd like to include stuff like that.
So many possibilities with these, like a DSi with the second DS cart slot!?
Thank you so much for posting these!
Click to expand...
Anything that helps, or can be used as a ref is always good :)
 
Added:
USG-CPU-01: scan only and some notes. It's 99.99% identical to USG-CPU-10. Differences: dpad footprint and 3 gnd vias.
 
You must log in or register to reply here.
Back
Top