https://www.walmart.com/ip/NOKIA-Po...-SDHC-Micro-SDXC/976529495?from=searchResults Here's the knock off of the Kingston adaptor. It works as far as I can tell.To expand on what Aurelio said, we used to favour the Kingston microSD to USB adapters because they were short and flat. They were ideal for use with the PMS-PD, had great RVLoader compatibility, they were cheap, and were readily available (not anymore sadly). There was no functional advantage to using them over other USB drives that fit the PMS-PD, they were just very convenient
What usb drive are you using?Hi, this is my first time making a portable and i am running on a few problems. I have an untrimmed wii running rvloader from 2 years ago. Gamecube games run perfectly but when it comes to wii games hiidra says, Found HWAccess_ES2 at 000291AB and then i think it tries to load the game (the game is punch out) but it just turns into a bright green screen and freezes. Any sollutions? I have pictures if you need it.
It might be incompatible with RVLoader's Hiidra, can you try another one? Also are you on version 1.6?Syrox 32GB Mini Fit UF32
The USB drive we recommend as of now is the SanDisk UltraFitI updated it but it still doesn't work what usb drive do you recommend?
I guess this is the place to report MicroSD card readers that are not compatible. From the past 2 hours of troubleshooting, I can confidently say that the official predecessor for the Kingston fcr-mrg2 is not compatible with the Wii's USB reader. It's model is listed below in full. It has issues being detected and will disappear from the Wii. It works fine when using it on a Windows system, so the component I got is not defective, it just isn't compatible. Plus it is on the thicker side so it isn't optimal for a portable anyways.
Kingston MobileLite Plus USB 3.2 microSDHC/SDXC UHS-II Card Reader (MLPM)
Hi, I'm sorry, but I'm not sure I understand you correctly. Are you stating that the USB 3.2 reader is the predecessor to the FRC-MRG2, or that the predecessor to the FCR-MRG2 (the FCR-MRB) is not compatible? If the latter, may I please have the name of the microSD card you're testing?
I'm testing a few microSD cards in a 4-layer Wii against a few adapters right now, and about half the cards work with the FCR-MRB. Most of the readers don't work in my 6-layer Wii. A surprising number of USB 3.x flash cards work in 4-layer Wiis with RVLoader, but I'm focused on testing microSD cards right now.
The USB drive we recommend as of now is the SanDisk UltraFit
You can easily keep the wii on for few minutes without risking anythingI got the usb but i cant try it out right now because of some problems with my fan. If I try to boot up the game the motherboard will probably die
Well it didnt work any other suggestions?The USB drive we recommend as of now is the SanDisk UltraFit
Well it didnt work any other suggestions?
C/RVL-CPU-01Can you please tell us which motherboard revision you are using? You can find that by removing the battery, as described in this guide in the section "2: Removing the battery tray":
https://bitbuilt.net/forums/index.php?threads/revision-identification-guide.863/
Alternatively, can you provide us with the first 6 digits of your Wii's serial number, which is on a sticker on the side of your Wii? It will probably start with "LEF" or "LEH", for example "LEH17291548-6".
Also I found that Virtual Console games dont consistantly boot up as well