Question How do the buttons work on a Wii Portable?

[sappyjupiter37]

My question is: how do I get the button contacts that I need to register button input to send to 4layertech’s GC+ 2 board? Would I cut them off a Gamecube controller, or are they made elsewhere?

 

[Stitches]

You can use the pads from a GC controller if you want to. Nowdays most people either use the DSlite breakout boards, or good old squishy tacts

 

[sappyjupiter37]

You can use the pads from a GC controller if you want to. Nowdays most people either use the DSlite breakout boards, or good old squishy tacts

So I would wire the GC button membranes to the GC+ 2?

 

[Stitches]

So I would wire the GC button membranes to the GC+ 2?

No, you wire the part of the controller PCB with the exposed contacts to the GC+. The conductive membrane sits on top of the PCB and closes the circuit when depressed.

 

[sappyjupiter37]

No, you wire the part of the controller PCB with the exposed contacts to the GC+. The conductive membrane sits on top of the PCB and closes the circuit when depressed.

Okay, so I’d take the contacts from a GC controller and wire that up to the GC+ 2.

 

[Alvaro]

the easiest way is just to get a squishy tact and wire it to gc+ plus and gnd. gc+ is literally a controller already no need to waste an actual gamecube controller

 

[sappyjupiter37]

the easiest way is just to get a squishy tact and wire it to gc+ plus and gnd. gc+ is literally a controller already no need to waste an actual gamecube controller

Okay, something like this? https://www.te.com/usa-en/product-1571294-3.html?te_bu=Cor&te_type=srch&te_campaign=ggl_usa_cor-ggl-usa-srch-selectmktg-fy21-googlefeed_sma_sma-1735_94&elqCampaignId=95278&mkwid=MwXlQveT|pcrid|386964346949|pkw||pmt||pdv|m|slid||productid|1571294-3|pgrid|78782457963|ptaid|pla-1398991370807|&utm_content=MwXlQveT|pcrid|386964346949|pkw||pmt||pdv|m|slid||productid|1571294-3|pgrid|78782457963|ptaid|pla-1398991370807&gclid=EAIaIQobChMIkvaT9Pqo8gIVkic4Ch13-Q0-EAQYCCABEgLtNPD_BwE

 

[Alvaro]

Okay, something like this? https://www.te.com/usa-en/product-1571294-3.html?te_bu=Cor&te_type=srch&te_campaign=ggl_usa_cor-ggl-usa-srch-selectmktg-fy21-googlefeed_sma_sma-1735_94&elqCampaignId=95278&mkwid=MwXlQveT|pcrid|386964346949|pkw||pmt||pdv|m|slid||productid|1571294-3|pgrid|78782457963|ptaid|pla-1398991370807|&utm_content=MwXlQveT|pcrid|386964346949|pkw||pmt||pdv|m|slid||productid|1571294-3|pgrid|78782457963|ptaid|pla-1398991370807&gclid=EAIaIQobChMIkvaT9Pqo8gIVkic4Ch13-Q0-EAQYCCABEgLtNPD_BwE

thats not a squishy tact.


just look at this gwii bom which has everything you would need and there is also links to like 3 more at the bottom. you can see there.

 

[sappyjupiter37]

thats not a squishy tact.


just look at this gwii bom which has everything you would need and there is also links to like 3 more at the bottom. you can see there.

Thank you. I will probably just build a G-Wii and 3D print the case myself and buy all these parts for it.