Great! Sounds good. I also have one more question before im off to my planning, when I make my custom regualtors, can I use a 90k ohm resistor on lets say the 3.3v voltage which only needs 1.89k ohm? So can I just buy like 10 90k ohm and use 4 of them with my regulators?
Worklog FIRST WII PORTABLE TIME
- Thread starter Alvaro
- Start date
No, you can't just go 90k on them all. The resistor you use tells the regulator what voltage to output, so you have to be close to the resistor values in the table. You can UNDERshoot the resistor values by 5-10% and have no problems, but you shouldn't go too close to that 10% if you can possibly avoid it.
So I can go close like go a little under or a little bit over?
Make sure you're not asking a question that's just been answered. We're here to help, but Stitches just answered that question, complete with guideline percentage error.
Yeah sorry about that, I just didn't quite understand but now I do. Thanks.Make sure you're not asking a question that's just been answered. We're here to help, but Stitches just answered that question, complete with guideline percentage error.
