Emetsys
.
- Joined
- Jun 3, 2019
- Messages
- 142
- Likes
- 118
Hello,
I'm building a portable wii and I have some issue with the wii PMS.
When I first tried it, it was working, although I was concerned about having the battery managment IC at 60°C and the regulators at 50°C when powered off(with 0V on the output voltages).
I had a 18650 battery connected.
Right now I made quite a big mistake, I connected the batterie in serie, with 16v+ on the b+ I guess I at least fried the battery managment IC, is it possible to test it without the battery to know if I fried anything else?
After looking at the DataSheet, I guess that connecting 3.5-4.5V to the SYS output of the charger IC (after removing it) should allow me to use the board without the battery system, am I right?
Thanks in advance,
Emetsys
I'm building a portable wii and I have some issue with the wii PMS.
When I first tried it, it was working, although I was concerned about having the battery managment IC at 60°C and the regulators at 50°C when powered off(with 0V on the output voltages).
I had a 18650 battery connected.
Right now I made quite a big mistake, I connected the batterie in serie, with 16v+ on the b+ I guess I at least fried the battery managment IC, is it possible to test it without the battery to know if I fried anything else?
After looking at the DataSheet, I guess that connecting 3.5-4.5V to the SYS output of the charger IC (after removing it) should allow me to use the board without the battery system, am I right?
Thanks in advance,
Emetsys
Last edited: