Question Trimmed Board getting to Priiloader

Honzapat

Honzapat

.
Joined
Sep 7, 2017
Messages
70
Likes
2
The usual way to get to priiloader if it isnt set to auto boot into it, is to hold power and reset btn, but they arent present on trimmed motherboard. Are there like some pins that also trigger the function of reset button?
Off topic
Will these regulators work for the trimmed console?:https://www.ebay.com/itm/10X-MP1484EN-DC-DC-Buck-Converter-Step-down-Regulator-Module-4-75V-23V-to-1V-17V/202113299335
or these:https://www.ebay.com/itm/5PCS-Mini-360-Step-Down-Module-DC-DC-Buck-Converter-4-75V-23V-to-1V-17V/391778145106
 
Last edited:
I'd recommend looking at the trimming guide again because reset is outlined there in the MX chip section.

Also, no and no on these voltage regulators . They will not work.
 
Last edited:
GingerOfOz said:
I'd recommend looking at the trimming guide again because reset is outlined there in the MX chip section.

Also, no and no on these voltage regulators . They will not work.
Click to expand...
Ok for the reset iam sorry i missed it but can i ask why it wouldnt work?It says it can deliver from 4.75 - 23V input a 1-17V output.
I dont wanna offense you, that you are not right but i just want to teach myself.
 
Honzapat said:
Ok for the reset iam sorry i missed it but can i ask why it wouldnt work?It says it can deliver from 4.75 - 23V input a 1-17V output.
I dont wanna offense you, that you are not right but i just want to teach myself.
Click to expand...
Those don't work because the parts aren't actually able to do what they say they can (unless you consider the part melting is "working correctly")
 
You must log in or register to reply here.

Similar threads

Question Wii only boots to Priiloader
Replies
0
Views
1K
ToddyHD
Back
Top