Nick . Joined Apr 24, 2016 Messages 121 Likes 20 Aug 10, 2016 #1 On the TI regulators do you have to wire ground and power wires to the top pads or can you wire them to the bottom pegs of the board?
On the TI regulators do you have to wire ground and power wires to the top pads or can you wire them to the bottom pegs of the board?
JacksonS . . . Joined Feb 17, 2016 Messages 308 Likes 630 Location Chicago, IL Portables 6 Aug 10, 2016 #2 Either place is fine. They are connected through the board so there's really no difference either way.
Either place is fine. They are connected through the board so there's really no difference either way.
Nick . Joined Apr 24, 2016 Messages 121 Likes 20 Aug 10, 2016 #3 That's kind of what I figured but I just wanted to make sure before I wired it up and tested it out. Thanks.
That's kind of what I figured but I just wanted to make sure before I wired it up and tested it out. Thanks.
