Worklog Ps2 shiden type-s

Joined
May 12, 2020
Messages
45
Likes
136
Ps2 scph-79001 motherboard
Hevy modified.
5v mod.
Custom copper 2mm heatsink
Custom 5v fan.
Custom trim.
Custom ethernet conector.
VideoCapture_20220124-024439.jpg
VideoCapture_20220124-024439.jpg
VideoCapture_20220124-024439.jpg
IMG-20220124-WA0018.jpeg
IMG-20220121-WA0075.jpeg
IMG-20220121-WA0066.jpeg
IMG-20220121-WA0071.jpeg
IMG-20220121-WA0059.jpeg
IMG-20220121-WA0053.jpeg
IMG-20220121-WA0042.jpeg
IMG-20220121-WA0036.jpeg
IMG-20220121-WA0038.jpeg
IMG-20220121-WA0027.jpeg
IMG-20220121-WA0025.jpeg
IMG-20220119-WA0063.jpeg
 
Last edited:
I desided to built 2 ps2 portables the ps2 shiden type-s with a 7" ips screen and a smaller ps2 portable with a 5" screen and the somewhat advanced trim, here is some pics of the smaller ps2 portable progress, custom heatsink.
IMG-20220922-WA0002.jpeg
IMG-20220922-WA0004.jpeg
IMG-20220922-WA0011.jpeg
IMG-20220922-WA0013.jpeg
IMG-20220922-WA0015.jpeg
IMG-20220922-WA0017.jpeg
IMG-20220922-WA0021.jpeg
IMG-20220922-WA0029.jpeg
IMG-20220922-WA0031.jpeg
IMG-20220922-WA0041.jpeg
20220922_234111.jpg
20220922_234631.jpg
20220922_234721.jpg
IMG-20220922-WA0084.jpeg
20220922_234736.jpg
IMG-20220922-WA0086.jpeg
20220922_235945.jpg
20220923_000106.jpg
IMG-20220922-WA0047.jpeg
 
Good job Daniel !!
 
This literally deserves its own worklog looks very nice, especially the fan/heatsink
 
Very impressive work! I especially like how you retained the metal over the GPU to help shield it from magnetic fields.
 
Back
Top