Hili
.
- Joined
- Oct 3, 2022
- Messages
- 56
- Likes
- 96
- Portables
- 2x Ashida, 2x TinyTendo, 1x N64HHv2, 1x XBOX 360 Portable, 1x GC Nano
Since I did my first Ashida, I always wanted to try the OMEGA trim and what better way to do it than with a GC Nano.
I decided to do the V1.1 because when @Wesk released the V2 I already ordered the parts. But I will maybe do a V2 sometimes too.
So here are some pictures of the build process:
Before and after trimming
Top and Bottom with pre wiring (2 euro coin as scale)
with installed heat sink; top half of the GC Nano with bluetooth module
And that's the finished product. I'm really proud of how it turned out. I used this project as preparation for the Kawaii, so I can tackle it when it's ready.
Maybe I will do a Short Stack from @loopj before that when I have the time.
I decided to do the V1.1 because when @Wesk released the V2 I already ordered the parts. But I will maybe do a V2 sometimes too.
So here are some pictures of the build process:
Before and after trimming
Top and Bottom with pre wiring (2 euro coin as scale)
with installed heat sink; top half of the GC Nano with bluetooth module
And that's the finished product. I'm really proud of how it turned out. I used this project as preparation for the Kawaii, so I can tackle it when it's ready.
Maybe I will do a Short Stack from @loopj before that when I have the time.
Last edited:
