Question Help with Wii Portable

[Aurelio]

I count 10 pins on the nand, and then the 4 pins for the 3.3 reg on the other side, that need to be found. I have already said the nand does not look like a problem, but i can see where the pins on it run to. the Reg for the 3.3v line I don't see them.

There’s everything on the compendium

 

[wifflebat]

ok, so now I am getting a blank screen. it's like it sees the Wii but is displaying no image. Any idea what it could be?

 

[GingerOfOz]

A black screen could mean a few things. For starters, try hooking up a reset button and hold it down when you boot up the Wii. If it boots into Priiloader, then you have a USB issue/ no USB connected. Also, check and make sure your U10 stuff is all good, as if it isn't working properly that can cause a black screen.

Hope this helps!

 

[wifflebat]

well i messed with U10 and now it is not lighting the screen at all. I have double checked the solder point for U10 it looks good. not sure what to do here.