wii

Does anybody know when RVL-PSU will be in stock again?

Hello, as the title says, I'm selling my G-Wii. I recently built it in November and I've had the best time playing on it. The G-Wii was built with VGA, MX chip relocation. I did not install Bluetooth since I didn't want to play with a Wii-mote on such a small screen. Everything else, is exactly...

I made a model of my wii2hdmi since i'm going to be using it in a project so I thought i might as well share it, may help if your also going to use one my silkscreen says: "WII2HDMI V4 2020/08/19" and it is a non-scaling model.

My Wii needed to boot into bootmii after trimming so I am posting the sd card relocation points here for anyone in the future that needs or wants to relocate SD. This is a CPU-01 board but I would think the points are the same on other 6 layer Wiis. I used the same color guide as the 4 layer...

Here’s a Wii I will be using to make the G Boy Wii portable. I just bought this on eBay and the seller said that the system has a broken disc drive but works and boots into the menu. But when I power it on it only shows a black screen. I tried using a different composite and component cable, I...

Hi all, I’ve been looking into portablising for a long time and have finally decided to give it a shot! My plan is to fit a Wii portable into a Wii u gamepad with original buttons and the batteries to be stored externally with a 3D printed mount. I hope this worklog can be helpful more...

Hi everyone, is there any worklog or guide that explains how to relocate wifi?

Hi, I’m am going to build my first Wii portable but I can’t find some parts: -USB C PD PCB -RVL Power Management System -RVL LCD Direct Drive Those parts are currently unavailable on the store, and I don’t know when there will be a restock If anybody have those, answer me

I started the trim yesterday and haven't done anything besides the cut. While I was doing that a part of my motherboards traces on the edge got cut and I am not sure if it is necessary or unimportant. I will include a picture but I am not sure if I should start again or keep going. Any...

portablizemii never worked perfectly for me. I could load gamecube games, but never wii games, even when using a compatible usb drive. though i would try BBloder, and that didn’t work either. any tips?

I totally forgot that I had to post this..... Features: - 4 controller ports with rumble (With adapter) - Auto switching AV port depending on cable - Nothing else really, it's just a really tiny GameCube Worklog here (With Nudez)...

BOM: It's pretty straight forward - - 4 Layer Wii - Red board USB A x2 - RVL-PSU x 1 - NAND Flex x1 - PTH or any other regulator for 1.8v - Gamecube controller extension lead x4 (for adapter) - A latching power switch (There's a bit of room to use whatever you can fit) - A 35x35x10 fan and...

After only 17 days[!] development & build time, my GCii Pocket is finally finished! So this are the planed final specs: - Near OMEGA Trimmed Wii [NAND & AVE Relocation] - 3.5" IPS LCD using tasty VGA - 1s2p 18650 via RVL PMS - little over 2h battery life - Audio via crippled but WiiHUD...

IT IS TIME - Digitally frankencased (coined by @Shank ) using 3D scans and a shitload of meshwork. - 3D printable. - Coming December 2020 maybe A lot of testing is still underway but I'll keep you all updated

Story time: I trimmed the board, relocated U10, and connected voltages to the board from the PMS. The board booted, to my delight. But then, disaster struck. I was considering removing the LDO to save some room in my case, and so I was probing with my multimeter to find where the 1.8 V output...

Hey y'all, I'm currently working on my Wii portable. There's several sensitive solder joints on the main Wii motherboard. These include AWG 38 magnet wire soldered to tiny AVE pins, as well as that *one* via that you can solder the U10 wire to. Anyone know how to make sure those wires never come...

Hi folks, today i'm happy to finally present to you my Wii Micro aka "Miicro" Project! About this project The goal of this project was to use as less additional components as possible and make most of them 3d printable. Also it recycles a lot of the Wii's mainboard and used the stock...

I am planning to make a Wii portable based off of the Nintendo Switch Lite's design. I'm going to balance aesthetic and functionality. I don't know if docking will be implemented. Here is my concept drawing (blurry finger included!): (The one on the left) I've already found an RVL-CPU-40 on...

Hi guys. Unfortunately I'm not getting any video out on my untrimmed Wii. I'm trying to do Aurelio's VGA mod. I enabled it in BBLoader already. I'm using AWG 38 magnet write for some of the lines due to having to solder to vias, and AWG 30 for soldering to pins. My Wii turns on all right...

I've been looking to get back into the portable wii world again, and after my first failed attempt a few months ago, I've taken time to learn about the basics of electricity, the parts that use it, and how things work. I'm still no where even close to perfect, nobody is, I'm only 15. But I'm...