wii build

Heya, I’m back again this year! I kept thinking about what I should do for this year’s competition… So how could I push past what I tried last year this year? Then it hit me: a redesigned Wii motherboard! If I could transplant the CPU, GPU, RAM and NAND onto a completely redesigned...

After working on it off and on for a few years, I finished my first Wii Portable build almost a year ago, which was a G-Wii modified to have HDMI out and external GC Controller support. Now, I believe I'm ready to tackle my first original design, which I plan to make a clamshell. It'll be at the...

Hello, I’m a little annoyed. I wanted to move my MX chip, but the connection corresponding to data line 14 is torn from my Wii. Is there another connection point? You will find the line that is torn off on the attachment, thank you for any information (The Wii works, I’m playing it right now.)

Hello everyone, I want to start off and give some backstory and context for myself and this worklog. I’ve wanted to get into portables for a while, I remember when the first few made their way onto the internet. As an adult with adult money I wanted to give it a try, my first attempt was in...

Hello, I am Greater Michigan Modding, and i am from, well Michigan USA. I am 14 & completely new to the wii scene, as i only got a wii in may. I have been really bored recently and decided tha i want to build a wii portable, but i have too many questions. i know basic electronics, and have...

So, bit of a strange issue as far as I can tell. I am using the RVL-AMP in a G-Wii build I've been working on. The audio works perfectly with headphones plugged in, but the speakers built into my portable only work when HS is shorted to ground, regardless of whether or not it is connected to...

Hi all! Back in 2021, I joined the BitBuilt community and tried my hand at portabilization with the GameBoy Adwiince v2. It even snagged 2nd place in the summer competition, despite the fact that the project crashed and burned on the very last day. I shorted the power supply during final...

A year or two ago I joined this group to make an ashida because I thought it would be fun. It was pretty fun, and I learned a lot, but I'm pretty busy with work, music and other projects. I don't play it at all, and I figured I would get rid of it. I will warn you it does have some issue with...

im using a custom wii case made by blake3dcake 3d print files I added support for the disc and light around it by using a soldering iron to melt the plastic and a dremel to sand it down and cut down the wii disc drives light. I also added a gamecube logo to the jewel in blender This is a...

I'm looking to attach a screen to an untrimed wii and then attach it to a custom wii shell. I just want a method of wiring a screen to it, I would also be ok with screen recomendations.

so i want to portabalize my wii and my optical drive is broken, so i want to take it out to free up space and so that it will use less power. after doing some research i found out that if i played a game off usb loader gx without the optical drive it wouldn't work. I also found out that if I...

So I've been working on building a G-Wii for a while now. I just got bluetooth working, but I haven't wired up any of the gamecube controls yet. Anyways, I need help understanding why RVLoader Always thinks the battery's at 1%. It also says that the current reads to be around "-2060mA", which...

Hey all! First thing I want to do is thank everyone for all their designs, guides, tear downs, and willingness to answer questions. Pretty amazing community you have all built. Special thanks to the 4LayerTech peeps Shank, Aurelio, and G-man, Wesk for the Ashida design, and GingerOfOz for hours...

Recently I saw Project Short Stack by Loopj and I really love how cute having a little console is. I considered making one myself, but doing so would require an OMEGA trim which is beyond my capabilities, at least at the moment. Enough time has passed since my spectacular failure with the...

I am new to the modding game and I need some help. I trimmed the Wii, transferred the u10, got the voltages where they should be, and video output (just composite) wired up. I can’t get the thing to boot. I did test it before hand and the Wii would only boot with the Bluetooth plugged in. So I...

Okay, after more than a year, I can finally start working on a wii portable. I found out about bitbuilt last summer and was shocked to discover what some people could do with my childhood console. first time I opened bitbuilt, I found the ultrawii sakura of @YveltalGriffin and wanted to do my...

Hello BitBuilt community, I'm thrilled to share a project that I've been working on recently. I've successfully transformed the RP2040 Zero into a functional GameCube controller. Building upon the foundations of the pico-rectangle project, I've taken it a step further by crafting a...

Hi, I'm still working on gathering components and finalizing details, but here are the consumables I've gathered so far ... The case is currently printed in gray PLA. However, I have an unopened spool of blue ASA, a full metal throat for my Ender 3 that has not yet been installed, and a 3D...

Basically this is the design i'm going to. The part that really made me think if i should use emulated or not are the controllers, i want them to be like the nintendo switches. That means you could deattach them and I was also thinking of trying to make a dock, just in case i want to play on a...

Does anybody by any chance have any spare G Boy Rev 3 or 4 Shoulder Button PCBs they’re willing to sell to me?