portable

Can i use wii U or 3ds speakers? Will any speaker work? will any audio amp board work?

I want to build a wii portable and want to use 3ds analog sticks. Do I just use the caps? Or do I somehow replace the analog stick on the gamecube with it. If yes, how do I do it?

Hello Ladies and Gentlemen, *EDIT* - My bored dumb ass was going through the rules and noticed: 4. Don't Post Other User's Work Without Permission I do apologize in advance for anybody who didn't want their content linked here, please let me know if you do not want it here, and I will take it...

I don't know which power distribution boards to use for a portable wii. Will one from a gamecube work? If not what are some good PMS boards to use?

Also, is there a way to trim the Wii disc drive smaller and relocate it once the wii motherboard is trimmed?

(Sorry to remove all context from this thread but coming back to this forum, to put it simply... I'm embarrassed to leave such a stupid question up, especially with the backlash it got. Start fresh and all that).

Hello, I'm new to making portables and would like to make a portable gamecube (Using a Wii motherboard). I plan to use the SD slot for the wii to load games, but i also want the satisfaction and option of inserting a real gamecube disc. Is it possible for me to connect a gamecube disc drive to a...

Well I finally trimmed and got a board to boot for an N64 so I figured might as well enter the competition and make a forum post. Specs: N64 with Expansion Pack 3.5" composite screen Horipad Retrobit remake controller Uamp Audio 3d Printed case(Transparent Ice Blue) This is a basic layout on...

(There is a TL;DR at the bottom.) I have come up with a cheap, quick, and easy portable that I would like to "make". I say "make" because it actually is already made, I am simply modifying it. I found a Q*bert mini arcade game at a thrift store for a couple bucks, and I played around with it for...

I am trying to start my first project to make a portable, and I was wondering if using a WiiU gamepad as a case would be a good idea. It would allow a lot of room for error and I was wondering if there would be a way to use the pieces already inside like the battery, speakers, and IR bar.

I started work on my first portable a few weeks ago and one dead board later I finally have a setup that boots to portabilize-me post-trim. Currently using 4x pth08080wad regulators to power the system and I've left the AV socket on for now to help with testing. I do have an RVL PMS coming so I...

Hey folks! I've spent a lot of time reading all of the guides/material/videos and I think I'm ready to get started! My current BOM is looking something like: Buy from BB: Audio Amp, PMS, Dual Tacts, GC+ Buy From other: 5" Screen, Speakers, Headphone Jack, Power Jack, Fan, Heatsink, Switch...

I know I've asked quite a bit of questions however, I was wondering about how much power a portable Wii would consume with a 5 inch (diagonally) screen with everything else usually in a portable like a Wii and fan etc.

Soon, from now to summer, I plan to build my Wii Portable. It will have a 4.3" av Screen, video out through HDMI (for compatibility), GameCube buttons/ L and R, 3ds sliders, Sterio speakers and 3.5mm jack (using UAmp), 4 GameCube controller inputs, USB C charging, USB A game data and more...

I feel like it's about time I start a worklog, I've been putting it off for a bit. I've gotten almost all of the parts I need, i'm just missing the case and audio amp (sort of). I recently trimmed my Wii and relocated bluetooth/A10 (i'll attach photos) Theres a few things i'm unsure of, I...

Hello everyone, I've been making a n64 portable lately and im in the stage of pre-trim, I have a problem of no audio. i made a picture using paint below, I'm using the PAM8803 mini Class D amp. with 2x 8Ohm speakers. Are my connections right? Or is it the fact that the 8Ohm speakers are...

Hey! So I checked out the wii trimming guide and have a general idea of how to make a wii portable (looked at a work log) but some forums about the specifics of certain parts of the process (mainly wiring and where everything connects to) would be useful as I have very little electronic...

Hello everyone, I've been using bitbuild for a long time to familiarize myself with the modding scene, i made a couple of projects before using raspberry pi before but decided not to make a big deal out of it since it's fairly common. lately I've been working on a playstation one portable since...

Is it possible to make a wii portable without using custom regulators? So i found out its hard to buy the custom regulators here in the Philippines and its expensive to buy outside the country. So is there a possible way to power it? Like the ps2 standard trim voltage relocation

Is it possible to make a Ps1 portable with ps1 classic? -7.4volt battery with 2s bms (2pcs 3.7v 4000mah) -5" eyoyo screen -usb port to add games using bleamsync -ps1 classic controller -amplifier board -Battery Capacity Indicator Electricity Power LED Display Board