n64

Hey everyone, I’m looking to commission a custom build that combines both an N64 and GameCube into a single system. I’m talking about a legit hardware mashup — like a single unit that has both an N64 and GameCube built into one shell, with a switch to swap between them (not emulation).I...

Hello all, I am currently building an n64 portable using the rvl pms 2. However every time I try to power it on it turns on for a second then right back off. I wired up batteries to positive and negative and the usb c to charge and ground. Lastly I wired the power switch to the power button...

It is time... for OpeN64!!! OpeN64 is essentially a 1:1 recreation of the N64 motherboard. The project was designed in KiCAD, and was made to enable and inspire N64 related mods. OpeN64 is based off the 03 revision of the N64 motherboard, but for most AIO portable type mods, motherboard...

I had an idea for a low-profile, swappable jumper pak / expansion pak for N64 portables. This would give builders the best of both worlds: a low power jumper pak for the vast majority of the library, and the ability to plug in the power-hungry expansion pak when needed for Majora, DK64, and...

Keyboard: Insanity:

Gimp Versions: Download - Full Size Download - Resized Get GIMP Paint.NET Versions: Download - Full Size Download - Resized Get Paint.NET A few weeks ago, I started work on an N64 compendium to aid in making another project I've been working on. I would've used @ShockSlayer 's N64 compendium...

The GIGA N64 Controller. An idea that I had swirling around in my head for a while, I've seen giant NES controllers and others, but seems the N64 is to obscure and complex for others to have tried it before. I wanted to stay as original to the OEM design as possible for my giant controller and...

I was inspired by @Madmorda to make a tiny N64 controller after seeing their worlds smallest Gamecube controller. My N64 controller is essentially the same thing in a different keychain, a GC2+ gamecube controller that I use a raphnet NGC-N64 adapter to convert to N64. I had reached out to...

Hello everyone! I thought about bringing back PSXpress for this year's contest, but I'm pretty confident that I won't be able to finish it in time for this year's deadline given all that I want to do, so I came up with a new idea! The idea of a sleek & compact N64 portable has been fairly...

Unlike the much more complete Wii undervolting "guide" this is just a smattering of info found when undervolting the DC, PS1 and N64. Dreamcast info (8w to 5.5w) N64 info (5w to 3.5w) PS1 info (1.5w to 0.7w) Like everything, use this info at your own risk and results will very likely vary...

I bought some years ago off of eBay what I can only assume was a failed modders collection that was comprised of various n64, GameCube, and wii mobos, controller boards, batteries, cases, buttons, etc. I bought the lot mainly for the wasp fusions that came with everything as gcloaders were...

N64 Brawler64 Controller Scan Contains: N64 Brawler64 Controller Front N64 Brawler64 Controller Back N64 Brawler64 Controller Z trigger N64 Brawler64 Controller Shoulder buttons Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans...

Hello friends! It's been a while since I've posted any of my projects, but I've decided to enter in this year's building contest with a project idea I've been toying with for a while. First, to explain! I joined the modding scene right at the end of the Modretro days, when projects were held...

So I finished my N64 portable a while ago and noticed it had strange lines in the bottom left of the screen... I thought maybe it needed the low pass video filter redone as I am using composite out. So I added a 75ohm resistor and the 47pf capacitor from the trimmed off part of the motherboard...

So I started a N64 portable and I have trimmed the board. I am now wiring up the PIF per the Guide on my revision 2 motherboard. I have a simple question that seems probably dumb but all of the Pin 6 and Pin 7 wiring locations on my motherboard already have continuity? The guide says that I need...

N64 Console Scan Contains: N64 Console Top Shell N64 Console Bottom Shell N64 Console AV port N64 Console Foot N64 Console Power Switch N64 Console Reset Button N64 Console Cartridge Mount Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE...

-An overview- I've taken inspiration from multiple users, a lot of them have shown just how small/thin handhelds can get. After flipping back in forth about what I wanted I've decided to be greedy (hence the name) and combine multiple consoles in one handheld. A raspberry pi cm4 will take care...

I'm looking for a 64amp and a 64pms and have had no luck finding the parts elsewhere. I would prefer to have the boards preprogrammed so that they are ready for use when I receive them, as i have no experience in making/programming boards. If you are willing to help, then please PM me! I have...

Just wanted to share my worklog blog post about an N64 mod and custom cable I made recently: https://amaiorano.io/2022/06/22/n64-rgb-mod-and-custom-cable.html

Hey Everyone, This is a retroactive worklog of building my "Nintendo GAME BOY 64" which I call the: M-Boy. It's probably unnecessary to mention: but my inspiration came from the amazing G-Boy that got me into this hobby. Moreover, the design is heavily inspired by the original Game Boy and of...