help

Solved, just messed up settings on my multimeter

Hey everyone, Running portabalize mii V4.7.9, I originally had a verbatim drive which on portabalize mii could run wii and gamecube games but after suspecting that may be the issue I swicthed to a sansdisk ultrafit, that still didnt work so I swicthed to a microsd to usb and still nothing... I...

Hello, I just picked up a Wii for repair locally, didn't know the history on it other than it really needs some love. Once I got home, I started basic testing, other than the disc drive being a little noisy (I'll look into the gears later). The Wii functions correctly, except, once I tested...

Im having trouble getting this to boot idk what I did wrong. I follow the YouTuber Dubensinhower the one who did a tutorial and I hooked up everything he did except I kept my av cable port on my motherboard to test to make it easier and then if it worked I would trim the rest off. But I can't...

Hello everyone, I’m working on a Wii portable (Ashida) using a 4-layer trimmed board, PMS-2.., and RVLoader. It had been working perfectly for almost a year, but after I completely disassembled it to install new batteries, the screen started showing strange colors. The screen board I’m using is...

Hi all, I have a PAL Nintendo 64 (NUS-CPU(P)-01 with DENC-NUS). Initially the console wasn’t outputting video. I disassembled it, cleaned everything, and surprisingly it worked again. After fully reassembling it with heatsinks and screws, the console stopped working (no video on TV). I had to...

Hey all, Just after some advise to try and diagnose my issue and hoping I haven't cooked something important I was doing a repair of the DC jack on my slim (model as title) and didn't notice that some strands of the desolder braid were left behind and briefly bridged the 8.5v and ground. Prior...

Whenever I load a Gamecube game using RVLoader, the game will crash 10-15 seconds after loading. Specifically with Super Mario Sunshine, I try to skip the opening movie and the console gives me the "An error has occurred, power off the console and refer to the Gamecube manual." I've...

I need to figure this out for a non-console related project, I thought I'd try asking this here. In essence, I need to make a circuit physically destroy itself on command, preferably only a cheap component so that it could be quickly reset by replacing it (the circuit will be on a breadboard)...

so y was playing sonic colors. then y went to the Wii menu re organize some stuff there. then y was going to shutdown the system but y had sonic colors inside so y pressed eject and immediately after pressed the power button (y do this in my ps3 but it works because it takes ages to turn off)...

Hey all quick question. I am putting together my Ashida and I have been running test a various stages. At this point I have the PMS, Ashida interface, and PD3 all in the case with the batteries hooked up and the system boots into RVLloader. But the fan is behaving strangely. It starts at...

Good day everyone. I will try to explain this as well as possible. I want to preface this by saying that this is my 3rd ashida build. I trimmed the Wii and tested the resistances like usual. All seemed well there, with the exception of the 3.3v being around 7.4k. Anyway, I soldered a test...

So, I wanted to test my trimmed wii. In order to do so I wired up my wii to the pms lite according to the documents om https://4layertech.com/products/pms2-lite I've left out the fan, sd-card reader and the light. I've added the av-cable and connector according to the ginger of vods video...

Hello everyone! I recently finished my Ashida, and I’m super happy with it! There's just one issue I’ve been pulling my hair out over, and I would like some advice on troubleshooting it. Every few boots (I'd say about 1 every 5) the bottom of my display will have lines appear. They are locked in...

I accidentally pushed the X button too hard and pushed back the pcb. After that the screen now does this. Does anyone have any ideas? Get a new screen? Rewire something? Thank you for reading!

First timer here. I'm working on a Wii-in-GameCube project based on Nold's Miicro and I just trimmed my 6-layer board but even after 2+ hours of sanding my 1V is still shorted to ground. I'm hoping someone can help me troubleshoot this and figure out how to find and fix the short. All other...

So I have been a lurker on the site or a long while, and I wanted to do a project and I finally for one of the first times in my life I have the funds to make a wii electronics project, but as I was opening my wii, the the tri wing screws feel either stuck or basically stripped, so what are some...

Hi, I'm brand new to portablizing and wanted some help with choosing what to build as my first portable. I really want to make a louii, as i love the look of it and the customization, but I heard it's not the best for beginners like me. I saw the Ashida, and I think it's okay but I don't really...

Hi, I'm currently thinking of making a wii portable. I'm getting a job soon (under 18), so I plan to save up about $600 to make a portable. I have no knowledge in making a portable, but I am willing to learn. I'm attempting to make a Louii as I love the design of it. do I have to buy custom...

My solder doesn't work very well. The fan connection sometimes doesn't work and it doesn't stick on to the bms. Does anyone know a cheap and easy to find solder?