Search results

If there is no continuity on the fuse then its likely blown. What I would suggest is removing the fuse then you can bridge the 2 solder pads. This will confirm if the fuse was the issue. I would also recommend checking to make sure your power supply is outputing 12v and its not spiking or...

Have you checked to see if the fuse is blown? I've circled it in blue. AFAIK all you need to check for is continuity on the fuse. If there is continuity then its fine, if there's nothing then its blown. Have you also tried a different power supply?

Sorry I mean't that I burnt of the pad under the ressitor array.

Is there by chance another spot for player 1? I somehow burnt/removed the solder pad under ra1.

This might be a stupid question but does the controller need to be wired up to player 1 for it to work in PortablizeMii?

Yep I wired up a different controller and it works fine now. Thanks!

So I got another trim working but now my Gamecube controller doesn't work in PortablizeMii. The controller seems to work in Priiloader but thats about it. Is there some kind of file that I need to re-install to get it working? Should I be creating a new thread if I have a different question or...

I did have a wire to the via. I also accidentally gave the 1.15v line 5v so im pretty sure that this board is dead now.

That worked and booted into priiloader fine. Now I'm trying to wire up USB and it freezes when the PortablizeMii logo pops up on the screen. I've tried 2 different USB's one of them being a 128GB Samsung Fit drive. Do you think this would be a software issue or something with my USB wiring?

So I made some progress. The glob of 3 pins is continuous with gnd, the input pin reads 3.28v and the via pin now reads 3.27v. Now it displays a black screen like its trying to display something. I wired up a reset switch and it wont boot into priiloader. My other voltages are now 3.28v, 0.971v...

So I have an OMGWTF trimmed Wii that is not booting. When I hook my regs up to it they read 3.3v, 0.990v and 1.13v. To me 0.990v and 1.13v seem too low but im not sure. The u10 via outputs 0.5v. I had u10 relocated before trimming and it worked fine. I covered the cpu and gpu in masking tape so...

Isn't that what the guide hub is though? There you have sub sections for each console with guides for them. Then there's also the guide submission which has even more guides in it.

No sorry, mods feel free to lock this thread. Thanks.

For the controller you can use the controller board from either an original or 3rd party gamecube controller, it would just be a lot larger then a GC+. Doing it this way would give you analog sticks and buttons you could use. AFAIK you can't just solder the IC to a breakout board because it...

One thing that I noticed is that it looks like your white wire coming from the Wii's audio amp is touching the ground pin as well? Maybe try resoldering that wire. You can also remove the onboard amp entirely and solder to the pads if that makes it easier. As for a replacement amp I've used...

I've sold a 3 Wii portables and a couple of GBZ's on eBay now so I might be able to help you out. 1. As long as you built it the best you could and it's sturdy enough for you to use, their's nothing you can really do. If someone throws it across the room or spills something on it its going to...

The cheapest option to ship it to Italy with tracking would be $43CAD. If your interested PM me and we can try to work something out.

This is now sold, feel free to lock this thread.

Selling my finished Wii Portable. The specs of this portable are: 4.3" Composite Display 3D Printed Case Dual Tact L and R buttons Micro USB Charging. This has bluetooth relocated so you can play Wii games that support Gamecube controllers. It has batteries from a 5000mAh battery bank, but im...

Have had this laying around for a bit so I decided to try to sell it. OMGWTF trimmed Wii board, does not come with any regs. At one point I tried to wire up bluetooth but gave up so the traces have been scratched, so please look at the photos. Can include a bluetooth module if needed. Asking...