Search results

I currently have two driver board firmwares based on the RTD2660 chip, which are respectively adapted for 4-inch and 5-inch screens, both supporting YPbPr signal input. During actual usage, I encountered an issue with abnormal signal recognition, and the specific situation is as follows: When...

Simple update Previous issues have been resolved. - Audio module - Random reboots - GC module LR button malfunction - Bait module I have uploaded gameplay videos to YouTube. Next, I might need to learn more about Fusion 360 to customize a stylish case for my laptop. Below are some photos of...

Thank you very much. I looked at the schematic again and it seems that the problem you mentioned does not exist, but I checked the wiring again and found some problems.

4-layer PCB, this pin is connected to the 3.3V on the second layer.

There are no wires, and the power connection will be changed to a plug-in terminal later.

NIFTY, the portable I made for myself, in my quest for the ultimate mini. NIFTY needs customized fpc and pcb, the fpc is mainly responsible for data transfer from wii motherboard to pcb. （fpc connects to bluetooth and usb via bending） -For the power supply, I used YveltalGriffin's open source...

I also have a separate pcb board to test the lm49450, I flywire it to the wii motherboard and the results are the same!

Here's my pcb wiring, I removed the GND for better viewing

The RVL-AMP is connected to the Wii, and the Wii recognizes the uamp-hub. However, there is no sound from the speakers when entering the game. When connecting headphones, there is a lot of noise, but faint game sounds can be heard. What could be the problem?

I designed a soft case for my laptop. NIFTY-fiex, including u10, nand, Bluetooth, USB, GC, AV, MX,and GCVideo soft connections. The soft connection has been tested and is functioning normally. Compatible with Thundervolt, it can connect to sda and scl. Use two 20p, 0.5mm sockets to connect to...

That's great.

I've been busy building the model and it's almost ready today, with a few minor details to be readjusted Equipped with vga output port

Assembly process: Using a surface pro3 cooler can keep the overall thickness of the wii to about five centimeters, I will be building a 3D model based on this project. Front view wiring example: the front needs to remove the usb port and replace it with a tf card. Back need to remove the...

I'll be uploading pictures or videos of what I've made later on

This is a low cost work log for making your own mini wii, you can either buy the modules I recommend or use your own existing modules, this will help you save your budget for other modules. The log is only a recommendation of suitable, but not preferred modules! I can only say that it works...

Extreme beauty of craftsmanship, fantastic, I'm going to build one.

It's really too mini, I have to learn a lot from the big guys

Here is a link to the basic information of the screen 大连佳显TFT显示屏GD24TWD规格参数/datasheet-一牛网论坛 (16rd.com)