Search results

it was more a case of its easier to talk on the discord as what has taken 2 hours could have been done quicker and its a lot easier to monitor discord while im working so i can help more easily,

jump on the Bitbuild discord, that way if i can't help there are others who probably can

plug the bluetooth and wifi back in and try turning it on, if that doesn't work reattach the disc drive and see if that works. also if you jump on the discord server we can talk easier

im gonna ask the obvious question, did you patch out wifi and bluetooth in BBloader?

designs Looking pretty sweet so far I've been looking at using smd switches like in the joycans also.

Been talking about this project in discord a couple of times so i thought i might as well show that i am actually working on it (all be it slowly) i am terrible at fusion360 and it helps me to figure out stuff easier hands on, so i present to you the first stage of my PS2 portable (to be named)...

So finally gotten around to starting a build log Still a week or so off being able to really get working on the Aran, as im waiting on a couple of parts (U-amp, and orange tacts) and uni work to finish. Really want to start working on it but ill get there eventually But patience is The Name of...

did you sever the trace underneath the u5 before you soldered on the u10?

CBAZY™ Hook up Wire Kit (Stranded Wire Kit) 22 Gauge Flexible Silicone Rubber Electric Wire 6 Colors 19.6 feet Each BNTECHGO 22 AWG 1007 Electric Wire 22 Gauge PVC 1007 Wire Stranded Wire Hook Up Wire 300V Stranded Tinned Copper Wire Black 25 ft Per Reel for DIY 22 AWG Silicone Hook Up Wire -...

without knowing where your located in the world, its kinda hard to reccomend anywhere other then amazon, or your local electronics store

You could use single stranded but it is not advisable, the problem with single strand wire is if you flex it too much of the quality is so so. the single conductive peive of wire inside can break. making your wire effectively useless whereas multi strand wire has lots of smaller metallic...

oh i know, i just spend $80aud on parts for my portable, plus side is ill have 5 uamps, but yeah portiblizing isn't cheap but a pack of various grit sandpaper shouldn't cost too much, not sure where you live but in Aus its like $4 (roughly $1.80us) for a pack of 5 grits

i mean you can, but sanding straight from high grit will, not be as clean a sanding and take 100x longer, always best to start with low grit, which will remove the larger chunks and get things going, then as you move up the grits it will start to smooth things out better.

You can use whatever colours you want, just make sure to stay consistent, conventional wisdom is red for voltage, black for ground, but if you don't have either of those don't worry use brown and purple or whatever.

reading through the gboy manual is helpful even if you aren't building a gboy. i reread it often to clarify stuff but general consensus is you want 22AWG wire for battery and power, 30AWG wrapping wire, and 34AWG magnet wire

RTM, you can use the buttons on the front of the wii to navigate

for starters you solder joints are terrible, considering the amount of wire you have exposed on the PMS, you probably have a short. The stuff circled in yellow all look like current issues, and if not soon will be. and the one circled in blue iyou have red and a black wire soldered to the GND...

i use tinkercad for quick model work, or simple things like brackets and mounts, i should start using things like fusion and blender more thought

Damn thats one sexy lady

Firstly don't double post, there is an edit button for a reason. good god thats an even worse idea, especially if you need to rearrange anything (which you almost certainly will), you obviously have access to a 3D printer, Print some mounts for the boards and other components and epoxy the...