Search results

I could absolutely be wrong, but it seems to me that the Wii itself is set to 4:3 output in the settings. RVLoader seems a bit stretched, so I thought I'd mention it just in case.

I mean the main thing is that having an external SD card would compromise on the aesthetics, which are a huge priority with this project. There's not really air flow inside the unit, the CPU and GPU are connected with thermal paste directly to the "fin half" of the shell, which then acts as a...

Yeah I think you have to have either a certain number of posts or a certain amount of time on the forums before you can post an image.

The only way I can see this happening is with commissions. Even then it would be incredibly expensive, and in my opinion it would just be better to learn the skills required yourself and work your way up.

Check out his ko-fi, you can directly donate for him to scan parts.

Correct. Here's a diagram of where you can wire it to:

There shouldn't be any shorts, but if you can visibly see a short, you could always check the compendium to see what's shorting and whether or not it'll be detrimental.

Well if you're going to get it working at all, this is your best bet. I'm hoping that the damaged area is just on top, because otherwise the connection is completely severed. If the trace still has some small connection to that via, you should be good. But other than that, you'd have to dig down...

You can just scrape the trace of data line 14 with an xacto knife or something similar, being careful not to scrape any ground or other traces, then just tin that and solder to it. You want to scrape it further down so you have room to try again if you mess up.

You need a 1.8v reference line. Even though you don't have the PMS-2, the PMS-Lite uses 1.8v for i2c and maybe some other things.

Gosh, that's a bummer. Yeah, those supports are absolutely too excessive for just that front piece. I could definitely write up a list of the settings I used that differ from default. You'd still have to enter them in manually, but at least it wouldn't be an overkill amount of support.

I have a tree support preset that prints without any issues, at least from the two prints I've done. I can absolutely share that if you'd like, though I made it in Bambu Studio, so it might be a bit difficult to use in other software. EDIT: link...

Of course! Gosh, every time I see one of your prints, I'm always so impressed from every aspect. Honestly, amazing looking stuff.

Hey so right out of the gate, for the Xii-Boy Ultra beta kits we're using JLC3DP's Nylon SLS and Resin SLS services for our shells. We're looking into a process for the final kits that gets a result similar to injection molding, but it's not reasonable for single quantities. Another service I'd...

Wii Variant: Family Board Revision: RVK-CPU-02 Serial Number: KMH70009615[0] Hollywood Datecode: 1333 (33rd week of 2013) Board Datecode: 1 '14 12 (26th or 27th week of 2014, determined from dot grid) Pics: Got this one a while ago, just completely forgot to post it here lol. If anyone's...

Just wanted to quickly note that the Xii-Boy Ultra uses the PMS's U10 emulation rather than relocation. Sorry that the Xii-Flex section isn't completed yet, I plan on finishing that sometime this week and uploading it to the guide. Really excited to see how of this build. Glad you were able to...

I'm not in the position to buy a portable unfortunately, but these are both really beautiful consoles! I wish you luck with selling them. Edit: I have a friend who's interested, I'll definitely forward your post to him.

Emulation U10 should be fine, I've never noticed any issues that I would attribute to U10, and I use my portable quite often. Though there has been one or two times where the portable hasn't turned on for a few extra seconds, or needed to power cycle it, but I can't isolate that to U10, and it's...

All you need to install up to is the Homebrew channel, then you can install RVLoader. Unless you want to create a NAND backup though. In that case, you can create the backup with Bootmii, but I don't believe you're supposed to install Priiloader. It's probably going to be fine, but just in case...

Sure, just check these posts https://bitbuilt.net/forums/threads/new-member-ashida-to-the-group.7038 https://bitbuilt.net/forums/threads/new-asida-in-my-collection.7184/