Search results

Good luck I just started mine as well! It took me some time to get the trim piece done for sure

Dude, your build looks sick. I wish I knew how to make custom PCBs.

Good luck! Those lines look perfect!

I'm not sure what is going on with the 3.3v line. The PMS powers fine when it isn't connected but the moment I connect 3.3v to the PMS it powers off and stops supplying to any of the regulators. I took everything off and sanded the board a bit more but that didn't help anything. I am looking...

The battery voltage is 4.12v.

Good and Bad updates. Good: The composite signal finally worked and showed RVLoader!!! Bad: Suddenly now when I connect the 3.3v to the PMS-Lite it gets no power. If I disconnect the 3.3v and then test the voltages on the PMS-Lite they are good and all show the correct values. The 3.3v...

Yes, I patched out wifi and enabled VGA

Update: I am now getting a signal but it is a black screen. No text or loader showing but it's at least getting a signal now. I changed the ground wire on the composite out to the adapter and that did it. I'm wondering if my U10 is now in question. If I use the emulation from the PMS lite I...

Okay, I think I figured out the voltages with my multimeter. I set the multimeter to VDC 20 on my dial. Battery voltage: 3.8v Wii voltages when powered on:

Cleaned up the flux. I'm not sure if I am testing the battery voltage correctly. What setting should I set my multimeter to for testing that? When powering on the PMS I get a 1 for the resistances. Is testing the voltages different than the resistance? I have my multimeter set to 20k ohms for...

I have trimmed 2 wii's now, both getting the same issue with no composite out. The Wii is getting power since the chips heat up when I hit the power button but nothing from the video signal. I did choose the VGA option when installing RVLoader. Does that mean composite doesn't output anymore...

Hello everyone! Long time lurker. I am building a G-Wii and need some help!